Maxell ZRY-316 manual Reference, Symptom Cause ACorrection

Symptom	Cause	aCorrection
The Recorder does not	No disc is inserted.	Insert a disc or tape. (Check that the
start playback.	No tape is inserted.	disc or tape indicator in the display
		window is lit.)
	An unplayable disc is inserted.	Insert a playable disc. (Check the disc
		type and Regional code.)
	The disc is placed upside down.	Place the disc with the playback side
		down.
	The disc is not placed within the	Place the disc on the disc tray correctly
	guide.	inside the guide.
	The disc is dirty.	Clean the disc.
	The Rating level is set.	Cancel the Rating function or change
		the rating level.
Video tape cannot be	Is the cassette compartment empty?	Eject the tape in.
inserted.
The remote control	There is an obstacle in the path of the	Remove the obstacle.
does not work properly.	remote control and this unit.
	The batteries in the remote control are	Replace the batteries with new ones.
	exhausted.
	The remote control is not pointed at	Point the remote control at the remote
	the remote sensor of the Recorder.	sensor of the Recorder.
	The remote control is too far from the	Operate the remote control within 23ft
	Recorder.	(7m).
	This remote control use the same but-	When using a VCR, first press the VCR
	tons for VCR and DVD functions	button. When using a DVD, first press
	(ex.PLAY).	the DVD button.
Camcorder image is	Camcorder is off.	Turn camcorder on and operate
not shown.		properly.
Camcorder image via	The recorder’s source is incorrect.	Use INPUT to select input channel
A/V input to Recorder is
		(AV1 or AV2).
not shown on TV
screen.
Timer recording is not	Clock in Record is not set to	Set clock to correct time.
possible.	correct time.
	Timer has been programmed	Reprogram Timer.
	incorrectly.
	(TIMER) indicator light does not	Reprogram Timer and turn Record off
	appear after programming timer.	to enable timer.

Reference

49