Storage Tray with Attachments

User Maintenance Instructions

This appliance requires little maintenance. It contains no user-serviceable parts. Any servicing requiring disassembly must be performed by a qualified appliance repair technician.

Cleaning Instructions

CAUTION: The Blades are sharp! Handle with care! Use extreme care when handling the Blades. Do not touch the Blades with your fingers. The Blades are very sharp and can cause injury if touched.

CAUTION: Never place Processor Power Base in water or any other liquid.

1.Always unplug the unit before cleaning. Make sure the Chopping Blade or Blade Holder Assembly has completely stopped before any disassembly.

2.Remove all attachments.

3.Wash the Processor Bowl with Rubber Seal Ring, Lid with Feed Chute, Food Pusher, Blade Holder, Blade Holder Stem, Slicing/Shredding/Grating Blades, Chopping Blade and Spatula in warm soapy water. Removable parts may also be cleaned in the dish- washer. Load parts on the top rack away from the dishwasher heating coil.

4.Never immerse the Processor Power Base in water or any other liquid. If necessary, wipe exterior surface with a soft, damp cloth or sponge and dry thoroughly.

Storage Instructions

1. Pack the Storage Tray. Fit the Blade Holder Stem down into the recessed area of the Tray. The unused Blades fit easily into any of the 4 storage areas (see illustration).

2. Make sure the Rubber Seal Ring fits flat and not twisted, in the upper

groove along the top of the Processing Bowl. Place the Processing Bowl in position on the Power Base. Grasping the Storage Trays center hub, lower the packed Storage Tray into the Bowl. Replace the Lid and lock before storing.

3.Push the cord into the Cord Storage area located on the underside of the appliance. Never wrap the cord around the appliance. The appli- ance should be stored in a clean, dry place.

13