Slicing, Shredding and Grating Continued

7.When finished processing, move the Speed Control Dial to OFF, the Indicator Light will go off, and unplug the unit.

Note: This Food Processor is equipped with an automatic brake that will stop the rotation of the Blade within seconds. Although this automatic brake provides an additional measure of safety, make sure that the Blade has completely stopped before you remove the Cover or unplug the unit.

8.Turn the Cover clockwise to disengage the locking tabs and lift the Cover from the Processing Bowl.

9.Carefully lift the Blade Holder Assembly from the Processing Bowl using the finger holes. Remove the Blade Holder Stem.

10.Turn the Processing Bowl handle clockwise to disengage the locking tabs and lift the bowl from the Power Base.

11.Remove contents from the Processing Bowl and the Blade Holder Assembly with the Spatula.

Chopping

CAUTION: Always unplug Food Processor from outlet before installing or removing attachments.

CAUTION: Use extreme care when handling the Chopping Blade. Do not touch the cutting edges with your fingers. The cutting edges are very sharp and can cause injury if touched.

1.Make sure the unit is unplugged. Attach the Processing Bowl to the Power Base. See Assembly Instructions for details.

2.Insert the Chopping Blade in the Processing Bowl over the Drive Shaft.

3.Place up to 7 1/2 cups of the food to be chopped into the Processing Bowl (see Food Processing Hints for food preparation details).

4.Place the Cover on the Processing Bowl with the locking extension at approximately the nine o'clock position. Turn the Cover counter clock- wise to engage the locking tabs and the Upper Interlock Mechanism in the Processing Bowl handle.

Note: If the Lid is difficult to assemble, make sure the Rubber Seal Ring fits flat and not twisted, in the upper groove along the top of the Processing Bowl. Remove Ring and reattach if necessary.

Note: If the Processing Bowl and the Cover are not correctly assembled, the Upper and Lower Safety Interlock Mechanism will not be closed and the Food Processor will not function.

9