Assembly Instructions (Cont.)
Note: If the Processing Bowl and the Cover are not correctly assembled, the Upper and Lower Safety Interlock Mechanism will not be closed and the Food Processor will not function.
9.Insert the Food Pusher in the Feed Tube on the Cover.
10.Make sure the Speed Control knob is in the OFF position, then plug the Cord into a 120V AC power outlet.
11.The Food Processor is now ready to begin use.
7.To chop foods, fit the Chopping Blade over the Drive Shaft. To slice, shred or grate cheese, use the Blade Holder Assembly (with the proper Blade Attachment). To use the Blade Holder, first slip the Blade Holder Stem over the Drive Shaft. Using the finger holes, attach the Blade Holder (sharp cutting edge up) to the Blade Holder Stem. .
8.Place the Cover on the Processing Bowl with the lock- ing extension at approximately the nine o'clock position. Rotate the Cover counter clockwise to engage the locking tabs and the Upper Interlock Mechanism in the Processing Bowl handle.
Note: If the Lid is difficult to assemble, make sure the Rubber Seal Ring fits flat and not twist- ed, in the upper groove along the top of the Processing Bowl. Remove Ring and reattach if necessary.
Locking
Extension
7