Instructions for Use

Slicing, Shredding and Grating

CAUTION: Always unplug Food Processor from outlet before installing or removing attachments.

CAUTION: Use extreme care when handling the Slicing, Shredding or Grating Blades. Do not touch the cutting edges with your fingers. The cutting edges are very sharp and can cause injury if touched.

1.Make sure the unit is unplugged. Remove Storage Tray from the Processing Bowl as outlined in the BEFORE FIRST USE section of this Owner's Manual. Keep the Storage Tray out of the way, where it cannot be tipped over and make sure the Tray and all Blades are out of the reach of children. Attach the Processing Bowl to the Power Base. See ASSEMBLY INSTRUCTIONS for details.

2.Insert a Slicing, Shredding or Grating Blade into the Blade Holder. See Assembly Instructions for specific details.

3.Insert the Blade Holder and Stem in the Processing Bowl over the Drive Shaft.

4.Place the Cover on the Processing Bowl with the locking extension at approximately the nine o'clock position. Turn the Cover counter clock- wise to engage the locking tabs and the Upper Interlock Mechanism in the Processing Bowl handle.

Note: If the Lid is difficult to assemble, make sure the Rubber Seal Ring fits flat and not twisted, in the upper groove along the top of the Processing Bowl. Remove Ring and reattach if necessary.

Note: If the Processing Bowl and the Cover are not correctly assembled, the Upper and Lower Safety Interlock Mechanism will not be closed and the Food Processor will not function.

5.Make sure unit is in the OFF position; then plug the Food Processor into a 120V AC electrical outlet.

6.Remove the Food Pusher and insert the food to be processed into the Feed Chute (see Food Processing Hints for food preparation details). Turn the Speed Control Dial to desired speed; the Indicator Light will come on. Use even, constant pressure on the Food Pusher to feed food into the Feed Chute. If processing slows or seems labored, increase the Speed Control Dial from 1 to 2 or turn to OFF and select the Pulse setting. Note: Do not use excessive force or you will damage the Food Processor.

Caution: Never use fingers or other utensils to push food down the Feed Chute. Always use the Food Pusher.

8