Maxtor WDR-516S manual Connecting External Storage, IEEE1394 Bay, Connecting IEEE1394 Device

14. Connecting External Storage

14.1. IEEE1394 Bay

WDR-516S has three IEEE1394 ports for external storage device interface. With them, WDR-516S can expand storage capacity up to 4TB.

<Note>

Some IEEE1394 Bay may not be recognized by the WDR-516S. Before purchasing, consult the local DENTEC distributor.

14.2. Connecting IEEE1394 Device

When using FireWire supported external HDD, hard drive bays can be connected to 1 port in the front panel or 2 ports in the rear panel. The WDR-516S does not supply power to the hard drive bay; therefore only bays that use external power can be used.

14.3. Available HDD

It is recommended to use the following HDD models with the WDR-516S. If a non-recommended HDD is used, DENTEC Corp. will not guarantee the warranty.

Manufacturer : MAXTOR

Series	Model No.	Size	Series	Model No.	Size
	6Y060L0	60GB		4R060L0	60GB
DiamondMax	6Y080L(P)0	80GB	DiamondMax	4R080L0	80GB
	6Y120L(P)0	120GB		4R120L0	120GB
Plus 9			16
	6Y160L(P)0	160GB		4R160L0	160GB
(7200rpm)			(5400rpm)
	6Y200P0	200GB
	6Y250P0	250GB

<Note>

Buffer for DiamondMax Plus 9’s model “L” is 2MB; for model “P” the buffer is 8MB.

WDR-516S Installation Guide 36 Rev 1.0(93/11)