Maxtor WDR-516S manual Screw 6EA TOP Cover

<Note>

The dip switch should be set at ‘MASTER’ position for the first installed or built-in HDD. Additional HDD should be set as ‘SLAVE.’ Identical dip switch setting may cause system conflict or mal-function.

(3) Remove the 6 screws as illustrated below and pull up the cover from the rear part to open

SCREW 6EA

TOP

COVER

(4)Take out power and data cable of HDD from Main PCB ASS’Y. Remove 4 HDD Bracket screws and take out HDD ASS’Y.

HDD POWER

CABLE

MAIN PCB ASS’Y

SCREW 4EA

HDD CABLE

WDR-516S Installation Guide 46 Rev 1.0(93/11)