As a general rule, the appliance should ALWAYS be disconnected from power source before servicing appliance or replacing component parts. Failure to disconnect the power increases the likelihood that a servicing error or mistake will result in serious or fatal injuries.

MAIN TOP

To Raise Ceran Cooktop

When cool open the door and remove the two screws securing the cook top to the frame. Once the screws are removed raise cook top and slide forward slightly. With the cook top forward disconnect the wire harness and remove the cooktop.

ELEMENTS

Ceran Element Cooktop

Cooking areas are identified by patterns in the Ceran surface. The elements consist of coil(s) contained in the element housing.

Power to the element (240 volts) is provided and controlled by an infinite switch. Each heating element is equipped with a temperature limiter, which prevents heat surges and ensures that the heating elements will not overheat. The element and temperature limiter is available as a complete unit or individual parts.

When a cooking area is turned ON, the coil element under the cook top will heat up and glow. The element will cycle on and off to maintain the heat setting. When the element cycles on, it is normal to see a red glow through the smooth top.

Note: It is normal for the element to cycle when set on the high setting.

To Remove Element:

1.Disconnect the appliance from power source before servicing.

16010107

2.Remove the two screws securing the main top to the frame.

3.Lift up slightly and slide the main top forward to access the wire harness. Disconnect the harness.

4.Lift the top off and lay aside securely with under side up.

5.Remove the screws securing element to main top.

6.Disconnect wiring to element and replace element.

7.Reverse procedure to reinstall.

To Remove Glass Top Assembly

1.Disconnect the appliance from power source before servicing.

2.Remove two (2) screws securing glass top to frame. The screws are located in the front left and right corners with the door open.

3.Grasp front edge of cooktop and slide out slightly. With the top moved forward disconnect the wiring harness.

4.Lift the top off the unit and lay aside securely.

5.Reverse the procedure to reinstall.

Ceran Element

•Left front and right rear element wattage: 208/240 volts @ 900/1200 watts. Approximately 48Ω.

•Left rear element wattage: 208/240 volts @ 1580/2200 watts. Approximately 27Ω.

•Dual element wattage: 208/240 volts @ 1580/2200 watts. Approximately 27Ω for

the outer element. 208/240 volts @ 580/ 750 watts. Approximately 73Ω for the inner element.

Section 3. Component Description

3-2

©2000 Maytag Appliances Sales Company

Page 10 Page 12
Page 11
Image 11
Maytag 16010107 service manual Main TOP, Elements, To Raise Ceran Cooktop, Ceran Element Cooktop
Page 10 Page 12

16010107 specifications

The Maytag 16010107 is a prominent appliance in the world of laundry solutions, offering a blend of durability, efficiency, and advanced technology. As a high-efficiency washer, it stands out for its performance and reliability, appealing to both everyday users and those who prioritize a robust laundry experience.

One of the key features of the Maytag 16010107 is its PowerWash cycle. This innovative washing cycle is designed to tackle tough stains and heavily soiled items with ease. The combination of an optimal wash action, increased wash time, and a powerful cleaning performance ensures that clothes emerge looking fresh and clean.

The Maytag 16010107 is equipped with the Optimal Dose Dispenser, which cleverly holds enough detergent for multiple loads. This feature minimizes waste and ensures that the correct amount of detergent is used every time, promoting efficiency and cost savings for users. Additionally, the washer has a large capacity that can accommodate sizable laundry loads, making it ideal for families or individuals with extensive laundry needs.

Energy efficiency is another hallmark of the Maytag 16010107. The appliance meets stringent Energy Star guidelines, ensuring lower water and energy consumption compared to conventional washers. This not only benefits the environment but also translates into savings on utility bills.

Durability is a core characteristic of Maytag appliances, and the 16010107 is no exception. Built with a robust design and high-quality materials, it is engineered to withstand the rigors of regular use. The washer also features a stainless steel wash basket, which resists chipping and snagging while cleaning clothes, ensuring a longer lifespan for both the appliance and the laundry it cleans.

In terms of user-friendly features, the Maytag 16010107 includes a smooth control panel that is easy to navigate. With multiple wash cycles and settings, users can easily customize their laundry experience based on their specific needs. The washer also boasts a quiet operation, allowing for use without disrupting household activities.

In summary, the Maytag 16010107 combines powerful cleaning performance, energy efficiency, and durable construction. It is designed to meet the demands of modern consumers while delivering the reliability that Maytag is known for. Whether facing everyday laundry challenges or tackling stubborn stains, this washer provides an exceptional laundry experience.
Top Page Image Contents