Bake Element

Element Wattage: 208/240 volts @ 2250/3000 watts. Approximately 19Ω

The bake function controls the Bake and Broil heating elements. During a Bake cycle, the Broil element will be on 6 seconds of a 60-second duty cycle, and then the Bake element will be on the remaining 54 seconds. The Bake and Broil elements will be staged with the exception of the rapid preheat. In the rapid preheat, available when the upper oven is used alone, the bake and broil elements will be on at 100% until temperature is reached. Once temperature is reached, the elements will cycle as outlined above.

Note: The Bake element will be the first element to turn on at the beginning of any conventional bake cycle.

To Access Bake Element:

1.Disconnect the appliance from power source before servicing.

2.Remove lift off door for more accessibility.

3.Remove four (4) screws securing bake element to back of oven cavity.

4.Gently pull element through cavity wall until terminals can be accessed.

5.Disconnect wiring.

6.Remove/replace element as necessary.

7.Reverse procedure to reinstall.

Broil Element

The broil function controls only the broil element. The bake element is inactive during a broil cycle. During a broil cycle, the control will monitor the oven temperature and cycle the broil element on and off to obtain the selected temperature.

16010107

To Access Broil Element:

1.Disconnect the appliance from power source before servicing.

2.Remove lift off door for more accessibility.

3.Remove broil support brackets (2) and remove screws securing broil element to back oven.

4.Gently pull element through cavity wall until terminals can be accessed.

5.Disconnect wiring.

6.Remove/Replace element as necessary.

7.Reverse procedure to reinstall.

Oven Sensor

The oven sensor is located inside the oven cavity, attached to the rear wall of the cavity. As the oven temperature increases, the resistance of the oven sensor increases. The resistance is measured by the electronic control to determine the oven temperature.

To Access Oven Sensor:

1.Disconnect the appliance from power source before servicing.

2.Open oven door and remove two (2) screws securing sensor to oven cavity. Gently pull through cavity wall.

3.Disconnect the oven sensor at the connector blocks and remove/replace as necessary.

4.Reattach the connector blocks and reassemble.

Section 3. Component Description

3-3

©2000 Maytag Appliances Sales Company

Page 11 Page 13
Page 12
Image 12
Maytag 16010107 service manual Bake Element, Broil Element, Oven Sensor
Page 11 Page 13

16010107 specifications

The Maytag 16010107 is a prominent appliance in the world of laundry solutions, offering a blend of durability, efficiency, and advanced technology. As a high-efficiency washer, it stands out for its performance and reliability, appealing to both everyday users and those who prioritize a robust laundry experience.

One of the key features of the Maytag 16010107 is its PowerWash cycle. This innovative washing cycle is designed to tackle tough stains and heavily soiled items with ease. The combination of an optimal wash action, increased wash time, and a powerful cleaning performance ensures that clothes emerge looking fresh and clean.

The Maytag 16010107 is equipped with the Optimal Dose Dispenser, which cleverly holds enough detergent for multiple loads. This feature minimizes waste and ensures that the correct amount of detergent is used every time, promoting efficiency and cost savings for users. Additionally, the washer has a large capacity that can accommodate sizable laundry loads, making it ideal for families or individuals with extensive laundry needs.

Energy efficiency is another hallmark of the Maytag 16010107. The appliance meets stringent Energy Star guidelines, ensuring lower water and energy consumption compared to conventional washers. This not only benefits the environment but also translates into savings on utility bills.

Durability is a core characteristic of Maytag appliances, and the 16010107 is no exception. Built with a robust design and high-quality materials, it is engineered to withstand the rigors of regular use. The washer also features a stainless steel wash basket, which resists chipping and snagging while cleaning clothes, ensuring a longer lifespan for both the appliance and the laundry it cleans.

In terms of user-friendly features, the Maytag 16010107 includes a smooth control panel that is easy to navigate. With multiple wash cycles and settings, users can easily customize their laundry experience based on their specific needs. The washer also boasts a quiet operation, allowing for use without disrupting household activities.

In summary, the Maytag 16010107 combines powerful cleaning performance, energy efficiency, and durable construction. It is designed to meet the demands of modern consumers while delivering the reliability that Maytag is known for. Whether facing everyday laundry challenges or tackling stubborn stains, this washer provides an exceptional laundry experience.
Top Page Image Contents