FAULT CODES

Fault Codes, Displayed in Upper Time Digits: There are three major fault codes that will be displayed in the time digits of the upper clock display to the left of the colon. Minor fault codes are displayed in the time digits to the right of the display colon, these are used to direct the technician to more specific locations for diagnosis. Major fault codes are as follows:

F1: Temperature runaway. Membrane switch shorted. Alarm is continuous, if cancel key is pressed alarm will stop, if fault still present alarm will repeat. If membrane switch is disconnected the alarm will only sound for 30 seconds and stop.

Correction: Test membrane switch and oven sensor, if OK, replace control.

F3: Open or shorted sensor. The cancel key resets the control and stops the alarm. If fault is still present it will reactivate the alarm when a cook mode is chosen.

Oven Temperature Adjust: Bake temperature can be adjusted by pressing Bake in either upper or lower oven, entering a temperature of 550ºF, then hold bake key for 3 seconds. Auto set is used to adjust the temperature either + / - 35ºF in 5º F increments

(+ / - 21ºC, in 3ºC increments).

Control Lockout: The control can be Locked Out by pressing Setup and then 4. When locked "Control Locked" will be displayed and scroll twice. Press Auto Set to toggle between Locked and Unlocked. The control locktout will not lock out the timer, clock, setup options or oven light.

Test Mode: Accessed by holding Cancel and Broil keys down for 3 seconds within 5 minutes of power up. The test mode cannot be accessed if the oven temperature is above 400ºF. When test mode is activated all digits will display "-". To exit the test mode press Cancel or auto exit occurs 16 seconds after last key pressed.

Correction: Check sensor and wiring for shorted or open circuit.

F9: Door lock error. Check the status of the door lock switches. Unlocked and locked switches must be in sequence, unlocked closed during normal operation and locked open. The opposite is true during a clean or locked state.

Timer Functions: The timer operates independently of all other functions. There are two timer functions. Timer 1 and Timer

2.The countdown time in the upper VFD can be toggled by pressing the clock and timer 1 keys.

Off/Cancel: Will cancel any oven operation by pressing the appropriate cancel key for the respective oven. Cancel will not effect the timer or clock functions.

KEY PRESSED

RELAY or ACTION

ACTIVATED

 

 

 

Upper Bake

Upper Bake Element

 

 

Lower Bake

Lower Bake Element

 

 

Upper Broil

Upper Broil Element

 

 

Lower Broil

Lower Broil Element

 

 

Convection Bake*

Convection fan*

 

 

Upper Oven Light

Upper Oven Light

 

 

Lower Oven Light

Lower Oven Light

 

 

Upper Clean

Motorized Door Lock, Upper

 

 

Lower Clean

Motorized Door Lock, Lower

 

 

Stop Time

Beeper

 

 

Cook Time

Display error codes

 

 

Clock

Display all time digits

 

 

*Convection Fan Relay: If equipped, the convection fan relay will activate the convect fan motor when the oven door is closed. In a convect mode the relay will shut off the convect fan when the door is opened.

16010107

Section 5. Troubleshooting

5-2

©2000 Maytag Appliances Sales Company

Page 30 Page 32
Page 31
Image 31
Maytag 16010107 service manual Fault Codes, Activated
Page 30 Page 32

16010107 specifications

The Maytag 16010107 is a prominent appliance in the world of laundry solutions, offering a blend of durability, efficiency, and advanced technology. As a high-efficiency washer, it stands out for its performance and reliability, appealing to both everyday users and those who prioritize a robust laundry experience.

One of the key features of the Maytag 16010107 is its PowerWash cycle. This innovative washing cycle is designed to tackle tough stains and heavily soiled items with ease. The combination of an optimal wash action, increased wash time, and a powerful cleaning performance ensures that clothes emerge looking fresh and clean.

The Maytag 16010107 is equipped with the Optimal Dose Dispenser, which cleverly holds enough detergent for multiple loads. This feature minimizes waste and ensures that the correct amount of detergent is used every time, promoting efficiency and cost savings for users. Additionally, the washer has a large capacity that can accommodate sizable laundry loads, making it ideal for families or individuals with extensive laundry needs.

Energy efficiency is another hallmark of the Maytag 16010107. The appliance meets stringent Energy Star guidelines, ensuring lower water and energy consumption compared to conventional washers. This not only benefits the environment but also translates into savings on utility bills.

Durability is a core characteristic of Maytag appliances, and the 16010107 is no exception. Built with a robust design and high-quality materials, it is engineered to withstand the rigors of regular use. The washer also features a stainless steel wash basket, which resists chipping and snagging while cleaning clothes, ensuring a longer lifespan for both the appliance and the laundry it cleans.

In terms of user-friendly features, the Maytag 16010107 includes a smooth control panel that is easy to navigate. With multiple wash cycles and settings, users can easily customize their laundry experience based on their specific needs. The washer also boasts a quiet operation, allowing for use without disrupting household activities.

In summary, the Maytag 16010107 combines powerful cleaning performance, energy efficiency, and durable construction. It is designed to meet the demands of modern consumers while delivering the reliability that Maytag is known for. Whether facing everyday laundry challenges or tackling stubborn stains, this washer provides an exceptional laundry experience.
Top Page Image Contents