3.Remove main top and slide forward. Disconnect wire harness. (See Top Removal).
LOWER LATCH ASSEMBLY
1.Disconnect the appliance from power source before servicing.
2.Remove main top as outlined in main top removal.
3.Remove the screws securing the side panel at the top and back of frame.
4.Remove the screws securing the rear
panel to frame. Remove rear panel.
5.Slide side panel away from the frame at rear and lift out of the slots in front. Remove side panel.
6.Release the bands, securing the insulation wrap, at the bottom.
7.Slide the insulation wrap back.
Note: This will aid in guiding the latch assembly in and out.
8.Disconnect the wiring from the lock switches at the rear.
9.Slide the latch assembly out from the rear.
To reinstall:
1.Slide latch assembly in from the rear.
2.Guide assembly to front using the side access.
3.Make sure the screw holes of the assembly line up with the screw holes in the frame.
4.Reinsert the screws.
16010107
Note: Make sure the insulation is back in place when finished. Failure to do so will result in hot spots and poor baking complaints.
5.Reattach band to the bottom of frame.
6.Reconnect wiring to the lock switches.
7.Reinstall the side panel.
8.Reinstall the rear panel.
9.Reinstall the main top.
Oven Door Hinge
The unit will have to be pulled away from the cabinetry to remove/replace door hinges.
To Access/Replace Oven Door Hinges:
1.Disconnect the appliance from power source before servicing.
2.Remove main top assembly as described previously and lay aside securely.
3.Remove oven door assembly as previously described and lay aside securely.
4.Remove the screws securing side panel at the top and back of frame.
5.Remove the screws securing the rear panel to frame.
6.Slide the side panel away from the frame at rear and lift out of the slots in the front. Remove panel.
7.Remove two (2) screws securing hinge to front frame flange.
8.Complete hinge assembly may be removed.
9.Reverse procedure to reinstall.
Section 3. Component Description |
©2000 Maytag Appliances Sales Company
