Signal Lights

Range is equipped with two signal lights to indicate when a surface element is on. The light will remain on until the element is turned off. After a cooking operation, be sure element and signal light is off.

The signal lights are located on the backguard panel and may be accessed from the backside of the panel when removed. The red indicator lens pop in and out, and the light slides into a lock position. Reverse the procedure to remove.

“Hot Surface” Light

The Gemini Range is equipped with a Hot Surface Light. This red light will turn on to indicate that the cooking area is hot and will remain on until the area has cooled.

The switch is located in the front center of the burner box, and may be accessed by removing the main top.

To Access Hot Surface Light:

1.Disconnect the appliance from power source before servicing.

2.Open oven door and remove the screws securing the main top to the frame.

3.Slide the top forward and disconnect the wire harness.

4.Lift the top off and lay on a protected surface with under side up.

5.Release the tabs securing the switch to the top. Once the tabs are released the switch can be removed.

6.Reverse procedure to replace.

Oven Light Replacement

The oven light used on the Gemini is a 12 volt 10 Watt Halogen bulb. The light automatically comes on when the door is opened or activation may occur via the light pad when the door is closed. The light will not operate during a clean cycle. The oven light will automatically come on one minute before the end of a clock controlled cooking operation.

To Replace Oven Light Bulb:

1.Disconnect power to the range.

2.Open oven door and locate oven light.

3.Remove the lens cover to gain access to bulb.

4.Carefully remove the old bulb by pulling straight out of ceramic base.

NOTE: To avoid damaging the bulb and decreasing the life of the bulb, do not touch the bulb with bare hands or fingers. Hold with a cloth or paper towel.

5.Push new bulb prongs straight into small holes of ceramic base.

6.Replace bulb cover by snapping into place.

7.Reconnect power to range and reset clock.

Bulb specifications

G4 Type Halogen Bi-Pin 10 w -12V

16010107

Section 3. Component Description

3-7

©2000 Maytag Appliances Sales Company

Page 15 Page 17
Page 16
Image 16
Maytag 16010107 service manual Signal Lights, Hot Surface Light, Oven Light Replacement, To Replace Oven Light Bulb
Page 15 Page 17

16010107 specifications

The Maytag 16010107 is a prominent appliance in the world of laundry solutions, offering a blend of durability, efficiency, and advanced technology. As a high-efficiency washer, it stands out for its performance and reliability, appealing to both everyday users and those who prioritize a robust laundry experience.

One of the key features of the Maytag 16010107 is its PowerWash cycle. This innovative washing cycle is designed to tackle tough stains and heavily soiled items with ease. The combination of an optimal wash action, increased wash time, and a powerful cleaning performance ensures that clothes emerge looking fresh and clean.

The Maytag 16010107 is equipped with the Optimal Dose Dispenser, which cleverly holds enough detergent for multiple loads. This feature minimizes waste and ensures that the correct amount of detergent is used every time, promoting efficiency and cost savings for users. Additionally, the washer has a large capacity that can accommodate sizable laundry loads, making it ideal for families or individuals with extensive laundry needs.

Energy efficiency is another hallmark of the Maytag 16010107. The appliance meets stringent Energy Star guidelines, ensuring lower water and energy consumption compared to conventional washers. This not only benefits the environment but also translates into savings on utility bills.

Durability is a core characteristic of Maytag appliances, and the 16010107 is no exception. Built with a robust design and high-quality materials, it is engineered to withstand the rigors of regular use. The washer also features a stainless steel wash basket, which resists chipping and snagging while cleaning clothes, ensuring a longer lifespan for both the appliance and the laundry it cleans.

In terms of user-friendly features, the Maytag 16010107 includes a smooth control panel that is easy to navigate. With multiple wash cycles and settings, users can easily customize their laundry experience based on their specific needs. The washer also boasts a quiet operation, allowing for use without disrupting household activities.

In summary, the Maytag 16010107 combines powerful cleaning performance, energy efficiency, and durable construction. It is designed to meet the demands of modern consumers while delivering the reliability that Maytag is known for. Whether facing everyday laundry challenges or tackling stubborn stains, this washer provides an exceptional laundry experience.
Top Page Image Contents