Maytag HE3940T, HE3940L Converting the Lower Element contd, Instructions for Installation contd

Models: HE2940S HE2966T HE2950S HE2930T HE2940L HE2940T HE2950T HE3930T HE3950S HE3966T HE3940S HE3950T HE3940L HE3940T

1 36
Download 36 pages 37.53 Kb
Page 14
Image 14
Instructions for Installation (cont'd)

Instructions for Installation (cont'd)

Converting the Lower Element (cont'd)

1. Before beginning the conversion turn "OFF" electric

4. Lift out the tab as shown to uncfip the terminal cover from

power supply to the water heater,

the thermostat. The terminal cover can now be removed from

 

the thermostat.

_WARNING

HAZARD OF ELECTRICAL SHOCK! Before removing any access panels or servicing the water heater,

make sure the electrical supply to the water heater is turned MOFF". FAILURE TO DO THIS COULD

RESULT IN DEATH, SERIOUS BODILY INJURY, OR PROPERTY DAMAGE.

2.The convertible element is located behind the lower access panel of the water heater. Remove the two screws securing the access panel, and remove panel.

L;ft out tab to uncllp terminal cover from

thermostat,

5.Remove the screws from terminal 2 of the element, and move the looped end of the wire aside.

d

3.Remove the block of insulation to expose the terminal cover.

6.The buss bar is labeled 5500 W. Place the buss bar over ter- minals 2 and 3 with the 5500 W visible. Install the extra screw provided into terminal 3.

14

Page 14
Image 14
Maytag HE3940T, HE3940L, HE3950T, HE3940S, HE3966T Converting the Lower Element contd, Instructions for Installation contd