Instructions for Installation (cont’d)

Filling the Water Heater

To fill the water heater with water:

1.Close the water heater drain valve by turning the handle to the right (clockwise). The drain valve is on the lower front of the water heater.

2.Open the cold water supply valve to the water heater.

NOTE: The cold water supply valve must be left open when the water heater is in use.

3.To insure complete filling of the tank, allow air to exit by opening the nearest hot water faucet. Allow water to run until a constant flow is obtained. This will let air out of the water heater and the piping.

CAUTION

Never use this water heater unless it is completely full of water. To prevent damage to the tank and heating element, the tank must be filled with water. Water must flow from the hot water faucet before turning “ON” power.

4. Check all new water piping for leaks. Repair as needed.

Converting the Lower

Element

These instructions only cover the conversion of the convert- ible element, read this entire manual before attempting to install or operate the water heater. The water heater is factory set to operate at 3800 watts. The lower element can be con- verted to operate at 5500 watts. Refer to “The Convertible Lower Element” section.

The Upper Element is a conventional 3800 watt element which only operates at its rated wattage on 240 volts. (See rat- ing plate on water heater).

The Lower Element of the water heater can be converted from operation at 3800 watts to 5500 watts on a 240 volt sys- tem.

If after reading these instructions and this manual, if you do not understand any portion, call Maytag Customer Service at 1-800-788-8899 for an authorized servicer.

WARNING

Before making the conversion to 5500 watts, check the (1) power supply…must be 240 volts, (2) wiring...10 gauge AWG @ Type TW, 60°C or equiva- lent, and (3) Circuit breakers or fusing…capable of 30 amp loading. Also, the installation must conform with this manual, local codes and electric utility rules. Failure to comply can result in DEATH, SERI-

OUS BODILY INJURY, OR PROPERTY DAMAGE.

NOTE: Whether or not the element conversion is made the model rating plate must be marked. Using a hard point ink pen, check the appropriate block within the model rating plate, which is located adjacent to the lower access panel.

Necessary element conversion parts are located in a small bag contained within the large plastic manual envelope attached to the side of the water heater.

CONVERSION PARTS

5500 W

SCREW

BUSS BAR

12

Page 11 Page 13
Page 12
Image 12
Maytag HRE21250PC, HRE21282PC manual Filling the Water Heater, Converting the Lower Element
Page 11 Page 13

HRE21282PC, HRE21250PC specifications

The Maytag HRE21282PC and HRE21250PC are two standout models in the brand's renowned lineup of laundry appliances, designed to combine efficiency, durability, and performance for the modern household. Both models feature an elegant design with user-friendly interfaces, making them attractive and accessible for all users.

One of the main features of the HRE21282PC and HRE21250PC is their impressive capacity. Both models boast a generous drum size that allows for larger loads, meaning users can complete their laundry in fewer cycles. This is particularly beneficial for families or individuals with busy lifestyles who need to maximize efficiency.

In terms of technology, these machines are equipped with Maytag’s advanced PowerWash cycle, which is designed to tackle tough stains and heavily soiled fabrics. This cycle works by utilizing a combination of robust wash actions and a prolonged wash time, ensuring that users can trust their appliances to deliver exceptional cleaning results.

Another notable feature is the Optimal Dose dispenser, which automatically releases the right amount of detergent at the perfect time during the wash cycle. This technology not only ensures optimal cleaning performance but also saves on detergent usage, making it a more economical option in the long run.

The HRE21282PC and HRE21250PC also come with a variety of wash cycles and temperature settings, allowing users to customize their laundry experience according to the specific needs of their garments. Whether dealing with delicate fabrics or heavy-duty items, these models are versatile enough to handle any type of load.

Durability is a crucial characteristic of Maytag appliances, and the HRE21282PC and HRE21250PC are no exceptions. Built with quality materials, they feature a robust construction that can withstand the rigors of frequent use. This reliability is complemented by a strong motor power and a solid build that contributes to their longevity.

Additionally, both models offer energy-efficient operations, contributing to lower utility bills while being environmentally friendly. Users can feel confident knowing they are making a responsible choice when selecting these appliances.

In summary, the Maytag HRE21282PC and HRE21250PC excel in capacity, efficiency, and durability. With advanced technology such as the PowerWash cycle and Optimal Dose dispenser, combined with customizable options and energy efficiency, these models cater to the diverse needs of today's consumers, serving as reliable partners in tackling everyday laundry challenges.
Top Page Image Contents