(ONTROlSATAGlAN(f

m QE(Ttvtu

INTELLIDRYWRINKLE FREE FABRICS WITH

PRESSCAREautomaticallysenses the moisture in the load and shuts off when the selected dryness level is reached.It minimizeswrinkles in synthetic fabrics such as acrylic,nylon, polyesteror blendsby providingan unheated cool-downperiodat the end of the cycle.Simplyset the con- trol to the desireddrynesslevel (MOREDRY- LESSDRY). The line betweenMORE DRYand LESS DRYis the initial preferredsettingfor the majorityof loads.

INTELLIDRY

INTELLIDRYREGULARautomaticallysensesthe moisture in the load and shuts off when the selected dryness level is reached.This cycleis designedfor loadssuchas towels,under- wear,t-shirts,jeans, etc. Set the controlto the desireddryness I level (MOREDRY- LESSDRY).The line betweenMOREDRY and LESSDRYis the initial preferredsettingfor the majorityof loads.

INTELLIDRY

OFF MORE DRY REGULAR

WRINKLE

FREE

 

 

 

FABRICS

 

 

0 TIME

DRY/

WITH PRESS

CARE

 

 

 

 

AIR

FLUFF

 

WRINKLE

RELEASE

DiMP DRY

 

 

 

 

 

WRINKLE RELEASEwill releasewrinkles from itemsthat are clean and dry but slight- ly wrinkled,such as from a crowdedcloset, packedsuitcase or from sitting in the dryer too longafterthe end of the cycle.It provides 10minutesof heatedtumblingand5 minutes of cool downtumblingwithout heat.

DAMP DRY is designed to “partially”dry items.It providesapproximately20 minutes of heated tumbling and 5 minutes of cool downtumblingwithout heat.

DRYELFABRICCARE is designedfor use on dry clean only fabrics in combi- nation with Dryel Dry Clean Only Fabric Care product. Placing the control dial arrowat the DRYELline will providethe optimal amountof time neededto prop- erly use Dryel.(For more informationon usingthe Dryelcycle,see page 7.)

TIME DRY/AIRFLUFF may be

selected for any load if the IntelliDry sensor system is not used. Set the controi to the desired numberof min- utes and choose the appropriatedry- ing temperaturefor the load.

NOTE:Thedialcanbeturnedin eitherdirectionto selecta cycle.Oncestarted,thedialwillnotadvanceat a specificrate duringthe IntelliDrycycles.At firstthedial maynotadvanceat all,Towardtheendof the cycle(whenthe loadbeginsto dry)thedialwilladvanceat a moreregularrateandmuchmorequicklyThisis normaloperation.

Page 6
Image 6
Maytag MD7600, MD-15 warranty ONTROlSATAGlANf, QETtvtu