Maytag P15, PEFY-P06 The smart way to use, Caring for the machine, Set the right room temperature

Models: P08 P24 NMSU-E P18 P12 P15 PEFY-P06

1 16
Download 16 pages 39.95 Kb
Page 7
Image 7
4. The smart way to use

4. The smart way to use

Even minimal steps to care for your air conditioner can help make its use far more effective in terms of air-conditioning effect, electricity charges, etc.

Set the right room temperature

In cooling operation, a temperature difference of about 5 °C [9 °F] between indoors and outdoors is optimum.

If the room temperature is raised by 1 °C [2 °F] during air-cooling operation, about 10 % electric power can be saved.

Excessive cooling is bad for health. It also results in the waste of electric power.

Clean the filter thoroughly

If the screen of the air filter becomes clogged, the airflow and air-conditioning effect can be significantly reduced.

Further, if the condition is left unattended, failure can result. It is particularly important to clean the filter at the beginning of the cooling and heating sea- sons. (When profuse dust and dirt have accumulated, clean the filter thoroughly.)

Prevent intrusion of heat during air-cooling

To prevent the intrusion of heat during cooling operation, provide a curtain or a blind on the window to block out direct sunlight. Also, do not open the entrance or exit except in cases of dire necessity.

Carry out ventilation sometimes

Since the air periodically gets dirty in a room that is kept closed for a long time, ventilation is sometimes necessary. When gas appliances are used together with the air conditioner, special precautions must be taken. If the “LOSSNAY” ventilation unit developed by our company is used, you can perform ventilation with less waste. For details on this unit, consult with your dealer.

GB

5. Caring for the machine

Always have filter maintenance performed by a service person. Before care-taking, turn the power supply OFF.

Set the right room temperature Caution:

Before you start cleaning, stop operation and turn OFF the power supply. Remember that the fan is rotating inside at high speed, posing a serious risk of injury.

Indoor units are equipped with filters to remove the dust of sucked-in air. Clean the filters using the methods shown in the following sketches. (The standard filter should normally be cleaned once a week, and the long-life filter at the beginning of each season.)

The life of the filter depends on where the unit is installed and how it is operated.

How to clean

Clear dust away lightly or clean it up with a vacuum cleaner. In the case of severe staining, wash the filter in lukewarm water mixed with dissolved neutral detergent or water, and then rinse off the detergent completely. After washing, dry it and fix it back into place.

Clean the filter thoroughly Caution:

Do not dry the filter by exposing it to direct sunlight or warming it using fire, etc. Doing so can result in the deformation of the filter.

Washing it in hot water (more than 50 °C [122 °F]) can also result in defor- mation.

Prevent intrusion of heat during air-cooling Caution:

Never pour water or flammable sprays onto the air conditioner. Cleaning using these methods can result in the failure of the air conditioner, electric shock, or fire.

7

KB79K384H01_en.p65

7

08.1.22, 6:02 PM

Page 7
Image 7
Maytag P15, P12 The smart way to use, Caring for the machine, Set the right room temperature, Clean the filter thoroughly