Maytag Thru-the-Wall Room Air Conditioner Unit Features, Transportation Damage, Parts Supplied

IMPORTANT NOTE TO THE OWNER

This equipment is to be serviced by professionally trained personnel only. If this equipment is improperly installed, adjusted or altered by an unqualified person, a safety hazard may result.

IMPORTANT NOTE TO THE SERVICER

Read this manual and familiarize yourself with the specific items which must be adhered to before attempting to service this unit. The precautions listed in this manual should not supersede existing practices but should be considered as supplemental information.

Unit Features

This unit has an exhaust air option which allows you to bring outdoor air into the room. To bring air in from outside, snap in the supplied perforated exhaust air plug (Figure 1) in the location shown in Figure 2. To use only indoor air, snap in the solid exhaust air plug.

NOTE: The exhaust air option (perforated plate installed) can be used in any operation mode.

Figure 1

EXHAUST AIR PLUG

Figure 2

Transportation Damage

All units are securely packed in shipping containers ap- proved by the National Safe Transit Association. The carton should be checked upon arrival for external damage. If damage is found, immediately make a written request for inspection by the carrier’s agent.

In the event of damage:

1.Note on the delivery receipt any visible damage to shipment or container.

2.Notify carrier promptly and request an inspection.

3.File the claim with the following supporting documents within the six month statute of limitations.

a.Original Bill of Lading, certified copy, or indemnity bond.

b.Original paid freight bill or indemnity.

c.Original invoice or certified copy, showing trade and other discounts or reductions.

d.Copy of the inspection report issued by carrier’s representative at the time damage is reported to the carrier.

The carrier is responsible for making prompt inspection of damage and for a thorough investigation of each claim. The distributor or manufacturer will not accept claims from dealers for transportation damage.

Unpacking The Unit

1.Cut the carton banding and open the carton.

2.Remove the literature, hardware pack, upper styrofoam shipping blocks, and styrofoam corner posts.

3.Remove the front assembly.

4.Cut the carton around the perimeter of the box 2” from the bottom and discard the top.

5.Lift the unit from the remaining carton.

6.Dispose of the cardboard and styrofoam at an ap- proved Recycle Center. Check all contents for dam- aged or missing parts. In case of concealed damage, notify the carrier as soon as possible—preferably within 5 days. Refer to step 3 of the Transportation Damage section if damage or missing parts are noted.

Parts Supplied

Size	Description	Quantity
1/2” x 1” x 14”	Foam Gasket	2
1/2” x 1/2”	Foam Gasket (54”)	1
	Sleeve Clip	2
#8 x 3/8”	Blunt Point Sheet Metal Screw	2
	Perforated (Fresh Air) Plug	1
	Solid (Fresh Air) Plug	1
	Plastic Knob	2
#8 x 3/8”	Washer Head Sheet Metal Screw 4

2