Maytag W10252706B wire connection Direct Wire, A B Cd E, Bare Wire Torque Specifications

Models: W10252706B

1 16
Download 16 pages 15.21 Kb
Page 11
Image 11
E. Neutral (white) wire

6.Use ³⁄₈" nut driver to connect the neutral (white) wire to the center terminal block post with one of the 10–32 hex nuts.

A

 

G

 

 

B

 

 

 

 

F

 

D

E

C

 

 

 

A. 10–32 hex nut

E. Neutral (white) wire

B. Line 2 (red)

F. Line 1 (black)

C. Bare (green) ground wire

G. Terminal lug

D.Ground-link screw

7.Connect line 2 (red) and line 1 (black) wires to the outer terminal block posts with 10-32 hex nuts.

8.Securely tighten hex nuts.

9.Replace terminal block access cover.

3-wire connection: Direct Wire

Use this method only if local codes permit connecting ground conductor to neutral supply wire.

1.Pull the wires through the conduit on cord/conduit plate on bottom of range. Allow enough slack to easily attach the wiring to the terminal block.

A G. Terminal lug3-wire connection: Direct WireAD. Bare (green) ground wireManual backgroundManual backgroundManual backgroundManual background

 

 

 

B

 

 

 

C

 

 

 

F

D

E

 

 

A. Terminal block

 

D. Line 2

(red) wire

B. Ground-link screw

E. Bare (green) ground wire

C. Cord/conduit plate

F. Line 1

(black) wire

2.Attach terminal lugs to line 2 (red), bare (green) ground, and line 1 (black) wires. Loosen (do not remove) the setscrew on the front of the terminal lug and insert exposed wire end through bottom of terminal lugs. Securely tighten setscrew to torque as shown in the following Bare Wire Torque Specifications chart.

A

Manual backgroundManual backgroundB

CD E

A. Terminal lug

B.Setscrew

C.Line 2 (red) wire

D.Bare (green) ground wire

E.Line 1 (black) wire

Bare Wire Torque Specifications

Attaching terminal lugs to the terminal block - 20 lbs-in. (2.3 N-m)

Wire Awg

Torque

8 gauge copper

25 lbs-in. (2.8 N-m)

 

 

6 gauge aluminum

35 lbs-in. (4.0 N-m)

 

 

3.Use ³⁄₈" nut driver to connect the bare (green) ground wire to the center terminal block post with one of the 10–32 hex nuts.

F

A

E

B

 

D

 

C

A. 10–32 hex nut

D. Bare (green) ground wire

B. Line 2 (red)

E. Line 1 (black)

C. Ground-link screw

F. Terminal lug

4.Connect line 2 (red) and line 1 (black) wires to the outer terminal block posts with 10-32 hex nuts.

5.Securely tighten hex nuts.

6.Replace terminal block access cover.

11

Page 11
Image 11
Maytag W10252706B wire connection Direct Wire, A B Cd E, Bare Wire Torque Specifications, D. Bare green ground wire