TROUBLESHOOTING

First try the solutions suggested here or visit our website at www.maytag.com/product_help –

In Canada www.maytag.ca for assistance and to possibly avoid a service call.

If you experience

Possible causes

 

 

Washer not performing as expected (cont.)

Solution

Washer won’t run or fill, washer stops working (cont.)

Washer not draining/ spinning, loads are still wet

Door locked at end of wash cycle

Door will not unlock

Incorrect or wrong wash or rinse temperatures

Not using HE detergent or using too

Only use HE detergent. Suds from regular detergents can

much HE detergent.

slow or stop the washer. Always measure detergent, following

 

manufacturer’s directions based on your load requirements.

 

 

 

To remove suds, cancel cycle. Select DRAIN & SPIN with Extra

 

Rinse. Touch and hold START. Do not add more detergent.

Door not opened between cycles.

After 3 wash cycles in a row are completed, the door must be

 

opened and then closed before a new cycle can begin.

Drain hose extends into standpipe

Check drain hose for proper installation. Use drain hose form

farther than 4.5" (114 mm).

and securely attach to drainpipe or tub. Do not tape over drain

 

opening.

 

 

The drain hose is clogged, or the

Lower drain hose if the end is higher than 96" (2.4 m) above

end of the drain hose more than

the floor. Remove any clogs from drain hose. See “Installation

96" (2.4 m) above the floor.

Requirements” in Installation Instructions.

 

 

The drain hose fits too tightly

The drain hose should be loose yet fit securely. Do not seal the

in the standpipe, or is it taped

drain hose with tape. The hose needs an air gap. See “Secure the

to the standpipe.

Drain Hose” in Installation Instructions.

 

 

Using cycles with a lower spin speed.

Cycles with lower spin speeds remove less water than cycles

 

with high spin speeds. Use the recommended cycle/speed spin

 

for your garment.

 

 

Washer not loaded as recommended.

A tightly packed or unbalanced load may not allow the washer to

 

spin correctly, leaving the load wetter than normal. See “Cycle

 

Guide” for load size recommendation for each cycle.

The load may be out of balance.

Avoid washing single items. Balance a single item such as a rug or

 

jeans jacket with a few extra items.

Not using HE detergent or using too

Use only HE detergent. Suds from regular detergent or using

much HE detergent.

too much detergent can slow or stop draining or spinning. Always

 

measure and follow manufacturer’s directions for your load. To

 

remove extra suds, select DRAIN & SPIN with Extra Rinse. Do not

 

add detergent.

Small items may have been caught in

Check the drum for any items sticking through the drum holes.

the pump or stuck between the washer

Empty pockets and use garment bags when washing small items.

drum and the outer tub.

 

Water remaining in washer after cycle.

Select DRAIN & SPIN to remove any water remaining in the

 

washer. The washer door will unlock at the end of the drain.

Door locks when cycle has started.

If the “Add a Garment” light is lit, touch START once. The door will

 

unlock.

Check for proper water supply.

Make sure hot and cold inlet hoses are not reversed.

 

 

 

Both hoses must be attached to both washer and faucet, and have

 

both hot and cold water flowing to inlet valve.

 

 

 

Check that inlet valve screens are not clogged.

 

 

 

Remove any kinks in hoses.

 

 

Washing many loads.

Your hot water tank may not have enough hot water to keep up

 

with the number of hot or warm washes. This is normal.

 

 

18

Page 18
Image 18
Maytag W10649235A, W10649236A - SP manual If you experience Possible causes

W10649235A, W10649236A - SP specifications

Maytag W10649236A and W10649235A are high-quality components designed to enhance the performance and efficiency of Maytag appliances, particularly in the context of washers and dryers. These parts serve specific roles that contribute to the effective operation of laundry equipment, ensuring a seamless experience for users.

One of the main features of these models is their robust construction aimed at longevity. Maytag is known for its commitment to manufacturing durable appliances, and these components are no exception. They are designed from high-quality materials that resist wear and tear, thus extending the lifespan of the washing machines and keeping them in excellent working condition.

In terms of technology, the W10649236A and W10649235A units include advanced engineering that promotes reliability and efficiency. These components are specifically designed to fit a wide range of Maytag models, which makes them versatile solutions for repair and maintenance. The precise fit not only ensures seamless integration into the machine but also minimizes the risk of malfunctions due to improper installation.

Another characteristic of these components is their ability to provide effective water and energy management. By optimizing water usage and energy consumption, these parts help households reduce their utility bills while contributing to environmental sustainability. Their design incorporates features that streamline the washing and drying processes, making them more efficient compared to older models.

Moreover, these components are engineered for ease of installation, often requiring no professional assistance for replacement. This user-friendly aspect allows homeowners to quickly and effectively maintain their appliances, reducing downtime and inconvenience.

In summary, the Maytag W10649236A and W10649235A are essential parts that embody the brand's dedication to quality, efficiency, and user convenience. Their durable construction, innovative technologies, and efficient operation make them a popular choice for those looking to maintain or upgrade their Maytag laundry appliances. Whether you're dealing with repairs or seeking to improve appliance performance, these components are a reliable option to consider for your laundry needs.