Clock and Timer
Clock and Timer Control (select models)
NOTE: The display will flash when electrical power is first supplied to the appliance or if there has been a power failure.
To Set the Clock:
1.Press the Clock pad.
•A beep will sound when the Clock pad is pressed.
2.Press or press and hold the ▲ or ▼ pad until the correct time of day appears in the display.
•Press to change the time in one minute increments.
•Press and hold to change the time in10 minute increments.
To recall the time of day when the timer is displayed, press the Clock pad.
To Set the Timer:
The timer can be set from one minute (0:01) up to 12 hours (12:00). The timer does
NOT control the oven.
1.Press the Timer pad.
•A beep will sound when the Timer pad is pressed.
•0:00 will appear in the display.
2.Press or press and hold the ▲ or ▼ pad until the correct time appears in the dis- play.
•Press to change the time in one minute increments.
•Press and hold to change the time in 10 minute increments.
•Timer will start automatically after a few seconds. The flashing colon indi- cates that the timer is in use.
•If the Clock pad is pressed, the colon will continue to flash to indi- cate the timer is in use.
3.A beep will sound at one minute (0:01).
4.At the end of the timer operation, 0:00 will appear in the display and three beeps will sound.
•One beep will sound every 10 seconds for 10 minutes or until the timer operation is cancelled.
To Cancel the Timer:
Press the Timer pad and the current time of day will reappear in the display.
NOTE: When 0:00 is displayed, pressing either the Timer or Clock pad will also cancel the timer operation.
5
