6

1

3 2

1. Gear Shift Lever

2.Neutral Lock Gate

3.Adjustment Bolt

1. Steuerknüppel

2.Verschlussperre in Leerlaufstellung

3.Einstellbolzen

1. Levier de changement de vitesse

2.Encoche de position neutre (point mort)

3.Vis de réglage

TRANSAXLE GEAR SHIFT LEVER NEUTRAL ADJUSTMENT

The transaxle should be in neutral when the gear shift lever is in neutral (N) (lock gate) position. The adjustment is preset at the factory; however, if adjustment is needed, proceed as follows:

•Make sure transaxle is in neutral (N).

NOTE: When the tractor rear wheels move freely, the trans- axle is in neutral.

•Loosen adjustment bolt in front of the right rear wheel.

•Position the gear shift lever in the neutral (N) position.

•Tighten adjustment bolt securely.

NOTE: If additional clearance is needed to get to adjustment bolt, move mower deck height to the lowest position.

EINSTELLUNG DES SCHALTHEBELS DES DIF- FERENTIALGETRIEBES

Das Differentialgetriebe muß sich in Leerlaufstellung be- finden, wenn der Schalthebel in der Neutral-Stellung (N) (Verschlußsperre) steht. Diese Einstellung wird bereits vom Hersteller im Werk durchgeführt. Sollte es jedoch dennoch erforderlich sein, weitere Einstellungen vorzunehmen, so muß folgendermaßen vorgegangen werden:

•Zunächst muß sichergestellt werden, daß sich das Dif- ferentialgetriebe in Leerlaufstellung (N) befindet.

HINWEIS: Wenn die Hinterräder des Traktors frei beweglich sind, ist das Getriebe immer in Leerlaufstellung.

•Den vorne auf dem rechten Hinterrad befindlichen Ein- stellbolzen lockern.

•Nun den Schalthebel in die Leerlaufstellung (N) bringen.

•Den Einstellbolzen wieder fest anziehen.

HINWEIS: Falls eine größere Bewegungsfreiheit benötigt wird, um an den Einstellbolzen zu gelangen, ist es ratsam, die Mäherplattform in die niedrigste Stellung abzusenken.

REGLAGE DE LA POSITION NEUTRE (POINT MORT) DU LEVIER DE CHANGEMENT DE VI- TESSE DES BOITES MECANIQUES.

La boîte de vitesse mécanique doit se trouver au point mort lorsque le levier de changement de vitesse se trouve dans l'encoche de position neutre (N). Le réglage de la position du levier est effectué en usine ; toutefois, un nouveau réglage peut s'avérer nécessaire, procéder alors de la façon suivante:

•Vérifier que la boîte de vitesse est au point mort.

REMARQUE : La boîte de vitesse est au point mort lorsque les roues arrières du tracteur peuvent être manoeuvrées librement.

•Desserrer la vis de réglage (3) située à l'avant de la roue arrière droite.

•Positionner le levier de changement de vitesse dans l'encoche de position neutre (N).

•Resserrer à fond la vis de réglage (3).

REMARQUE : Mettre le carter de coupe en position basse afin de dégager un peu plus d'espace pour effectuer ce réglage.

68

Page 67 Page 69
Page 68
Image 68
McCulloch 96041009101, 532 43 29-74 manual Transaxle Gear Shift Lever Neutral Adjustment
Page 67 Page 69

532 43 29-74, 96041009101 specifications

The McCulloch 96041009101,532 43 29-74 is a robust and highly efficient chainsaw, crafted for both amateur and professional users who demand reliability and power. This model stands out in the McCulloch lineup for its exceptional engineering and performance, making it an ideal choice for homeowners and landscape professionals alike.

One of the main features of the McCulloch 96041009101 is its powerful engine. Engineered with a high-performance two-stroke engine, it delivers impressive cutting capacity while maintaining lightweight portability. The engine is designed to optimize fuel efficiency and minimize emissions, complying with modern environmental standards without sacrificing performance.

The chainsaw comes equipped with a quality bar and chain system that ensures smooth and efficient cuts. The 16-inch cutting bar is expertly designed for versatility, allowing for a range of tasks from light trimming to more extensive tree felling. The chain speed is adjustable, allowing users to customize the cutting experience based on the challenges at hand.

Another notable characteristic is the ergonomic design of the saw. It features a comfortable grip and balanced body that reduces user fatigue during extended periods of operation. The anti-vibration technology integrated into the handle decreases the strain on the hands and arms, enabling users to work longer and more effectively.

Safety features are paramount in any power tool, and the McCulloch 96041009101 does not disappoint. It includes a chain brake for added safety, which will stop the chain immediately in case of kickback, protecting the user from potential harm. Additionally, the side-mounted chain tensioning system allows for easy adjustments on the go, ensuring the proper tension for optimal cutting performance.

Maintenance is simplified with this model. The tool-less access to the air filter and spark plug allows users to easily perform routine maintenance, ensuring the chainsaw remains in peak operating condition.

In summary, the McCulloch 96041009101,532 43 29-74 is a versatile and powerful chainsaw that expertly blends performance, safety, and user comfort. Whether you are a professional landscaper or a homeowner tackling DIY projects, this chainsaw delivers reliability and efficiency, making it an outstanding choice in its category.
Top Page Image Contents