McIntosh C2300 owner manual IR Sensor receives commands from a Remote Control

Front Panel Displays, Controls, Push-buttons and Jack

INPUT Control selects the desired audio signals for listening and record- ing. It is also used in the setup mode for various functions

IR Sensor receives commands from a Remote Control

DISPLAY indicates the	METER indicates the
Sources, Volume, other	Preamplifier’s Right
Audio Settings, Opera-	Channel relative Output
tional Functions and	Level
Setup Mode Settings

METER indicates	TRIM SELECT	TRIM ADJUST
the Preamplifier’s	allows selection	allows adjustment
Left Channel relative	of various types	of various types
Output Level	of audio settings.	audio settings. It
	It is also used in	is also used in the
	the setup mode for	setup mode for
	various functions	various functions

VOLUME Control ad- justs the listening level for both channels

Connection for low impedance dy- namic headphones with 1/4” (0.64cm) stereo phone type plug, for private listening

MONO with	SETUP Mode Push-
indicator,	button with indicator,
combines the	allows the changing
Left and Right	of the default settings
Channel signals	for Inputs, Levels,
for Monophonic	Special Functions
Sound	and the Display

OUTPUTS 1 and 2 Push- buttons with indicators, allow the C2300 to switch Power Control and Audio to two separate Stereo Power Amplifiers

TONE BYPASS with indicator, when activated the audio signal bypass- es the Tone Controls

REC MONITOR Push-but- ton with indicator, allows listening to the playback of REC/SRVR Source while the recording is in process

MUTE Push-but- ton with indicator, activates different Muting Modes

STANDBY/ON Push-button switch- es the C2300 ON or OFF (Standby) and resets the micropro- cessors

10