McIntosh C2300 owner manual Remote Control Push-Buttons

Remote Control Push-Buttons

LED illuminates during the time a remote command is sent to the C2300

Press to Power the C2300 ON or OFF

Press MODE to switch between Stereo and Mono Modes

Turns AC Power ON or OFF to certain McIntosh Components when connected via the Data Port

Selects Functions for McIntosh Home Controller and as a “shift” key when used with the AM or FM push-buttons to select Output (Spkr) 1 or 2

Switches OFF the entire C2300 System

Use to select tuner presets, disc tracks or any numbered operation

Press to Power ON the C2300

Press to Power OFF the C2300

Selects Output 2, FM Tuner Operat- ing Functions and Track Selection on certain McIntosh CD Players

Selects Output 1, AM Tuner Operat- ing Functions and Disc Selection on certain McIntosh Disc Players

Press TRIM and then the LEVEL Push-buttons to select and adjust various functions

Press to REVIEW Tuner Station Presets and select certain functions on a variety of McIntosh Compo- nents

Adjusts the volume level up or down

Mutes the audio

Selects On Screen Functions on a variety of McIntosh Components

Selects a Disc Player, Music Server or Tape Recorder Function and also performs various functions on a variety of McIntosh Components

Selects one of the nine available Audio Sources

Press to listen to the selected Record Out Signal

Selects the FF (Fast Forward) or REWind Mode on Disc Player, Music Server or Tape Recorder; tunes Up or Down the AM/FM Dial

Scrolls through the available C2300 Inputs

Note: Push-buttons whose function is not identified above are for use with other McIntosh Products.

14