McIntosh C500 owner manual Trigger Selection, Accessory Control

10.If no other adjustments are to be made at this time, press the SETUP Push-button to exit the Setup Preamp Mode or proceed to the next desired Setup Preamp Mode for adjustment.

Trigger Selection

The Trigger A and B Power Control Outputs on the C500 Controller are reassignable from their default settings to ac- tivate only when a given Input(s) is selected. To change ei- ther Trigger A or B from the default setting perform the fol- lowing steps:

Note: Power Control Cables coming from the components to be controlled need to be connected to the correct Trigger Jack on the Rear Panel of the C500C to function.

1.Press the SETUP Push-button twice to access the Setup Preamp Mode unless the C500C is already in the Setup Preamp Mode.

2.Rotate the MENU Control until the Alphanumeric Dis- play indicates “TRIG TUN --” . Refer to figure 36.

Figure 36

3.Rotate the SELECT 1 Control until the desired Input Title to be changed appears in the Display, e.g. “TRIG DVD --” .

4.Rotate the SELECT 2 Control until the desired Trigger A or B (in this example the DVD Input will activate the Trigger A Jack) appears in the Display, e.g. “TRIG DVD A”. Refer to figure 37.

Accessory Control

When the Trigger A or B Power Control Outputs on the C500 Controller are used, one of the Triggers may be as- signed to switched On or Off by using the ACCessory Push- button on the supplied Remote Control. To select either Trigger A or B for remote operation, perform the following steps:

1.Press the SETUP Push-button twice to access the Setup Preamp Mode unless the C500C is already in the Setup Preamp Mode.

2.Rotate the MENU Control until the Alphanumeric Dis- play indicates “ACC CONTROL --”. Refer to figure 38.

Figure 38

3.Rotate the SELECT 2 Control until the desired Trigger A or B appears in the Display, e.g. “ACC CONTROL A”. Refer to figure 39.

Figure 39

Note: Devices connected to the Trigger (A or B) Jacks will be effected when Trigger (A or B) in SETUP is changed.

4.If no other adjustments are to be made at this time, press the SETUP Push-button to exit the Setup Preamp Mode or proceed to the next desired Setup Preamp Mode for adjustment.

Figure 37

Note: Additional Inputs may also be assigned in the same manner to also activate Trigger A.

5.If no other adjustments are to be made at this time, press the SETUP Push-button to exit the Setup Preamp Mode or proceed to the next desired Setup Preamp Mode for adjustment.

22