ANEMOMETER (WIND SENSOR)
FEATURES
•Wind speed and wind direction measurement
•Remote wind speed and wind direction data transmission to the main unit via 433 MHz signal
•Operating range 100 feet (30 meters)
•Wall or pole mount
A
B
D
C
A. WIND VANE
Measures wind direction
B. WIND CUPS
Measures wind speed
C. ANEMOMETER BASE
•Holds battery compartment
•Allows mounting the anemometer vertically
D. ANEMOMETER ARM
Keeps anemometer assembly together
E
G
F
H
E. WIND CUPS SHAFT
Holds wind cups on the anemometer arm
F. BATTERY COMPARTMENT
Holds 2
G. WALL MOUNT SCREW OPENINGS
Allows securing the anemometer in place
H. BATTERY COVER
Allows securing 2 AA size batteries on the anemometer base
Assembly
•With a flashlight, look into the mounting hole that will receive the anemometer axle shaft, on the back of the wind cups. Check that the set screw is backed off appropriately, not obstructing the opening.
•Place the wind cups over the axle shaft protruding from the anemometer housing and gently slide into place
•Insert the Allen wrench tool provided into the wind cups opening and tighten the small set screw inside
•Test to assure the wind cups are securely mounted on the anemometer shaft and spin freely
8
