STEP 12-ATTACH LP CYLINDER TO GRILL - (ALL MODELS)
•Obtain a filled LP Cylinder at your local LP gas supplier or exchange center.
•Set bottom ring of LP Cylinder into Cylinder Bracket through round hole in Bottom Shelf (Fig. H). Turn Adjusting Knob clockwise to secure LP Cylinder inside Cylinder Bracket(Fig. H).
•Turn all control knobs and LP Cylinder valve to the “Off” position.
•Take the protective cap off the cylinder valve. (Fig. I) Hold Regulator in a straight line with LP Cylinder valve so the connection does not cross thread. Insert nipple into the cylinder valve. Hand tighten coupling nut in clockwise direction. Do not use tools.
•Make sure Regulator hose does not contact hot metal surfaces.
WARNING: Do not use grill if this connection can not be completed. Be sure to
test | this connection for gas leaks before operation of Gas Grill. |
ROUTE HOSE UNDER BRACE ON MODELS WITH WOODEN LEGS 
LP CYLINDER 
ADJUSTING
KNOB
ROUTE HOSE ON
OUTSIDE OF LEG ON
ALL MODELS
FIG. H
REGULATOR
LP GAS 
VALVE
TURN REGULATOR COUPLING NUT CLOCKWISE TO TIGHTEN
FIG. I
PROTECTIVE CAP
20
