ASSEMBLY INSTRUCTIONS for BONZA and BONZA DELUXE MODELS
PREPARATION FOR ASSEMBLY: Removing parts from carton and some assembly will require two people. Before starting assembly, read the instructions and your manual.
This manual covers several Aussie Grill models. Use only the steps that pertain to your model. Remove all the parts from the carton and lay them on a smooth, clean surface. (You may cut the carton, spread it out, and use it as a pad to protect part finishes.) Look in the Parts List below under your model num- ber to find the exact parts you need. Do not throw away any packaging until you have located all the parts.
Follow instructions of each step in the order they are written as you look at the diagrams. This will allow little confusion and easier assembly.
If you have any questions which require help, contact Customer Service at
| PART/DESCRIPTION | PART# | QTY. | BONZA |
1 | Left Tear- | *See Bottom | 1 | 1 |
Drop Side |
| |||
| Table | Page Note |
| Birch |
2 | Right Tear- | *See Bottom | 1 | Birch |
| Drop Side | |||
| Table | Page Note | 1 | Kempas |
3 | Deluxe | 03.6087.00 | 2 |
|
| Side |
| ||
| Table | 03.6087.02 | 2 |
|
4 | Rear Wheel Leg - Wood | *See Bottom | 1 | Birch |
|
| |||
|
| Page Note |
| Kempas |
5 | Front Wheel Leg - Wood | *See Bottom | 1 | Birch |
|
|
| ||
|
| Page Note |
| Kempas |
6Rear Wheel Leg - Metal Tubing
03.6088.03 1
BONZA DELUXE
Kempas Birch
Kempas
Kempas
Sterling
7 | Front Wheel Leg - Metal Tubing | 03.6089.03 | 1 | Sterling |
|
| |||
|
|
| ||
8 | Bolt | 03.4062.00 | 28 | All Models |
| 1/4” x 1” |
9 | Bolt |
|
|
| 1/4” x 1 | 03.6090.00 | 24 |
| 3/8” |
|
|
All Models
10 Rear Fixed Leg - Wood | *See Bottom | 1 | Birch |
| Page Note | 1 | Kempas |
*Note: Call Customer Service at
