STEP 1- WHEEL LEG/ SIDE TABLE ASSEMBLY TOOLS:
|
| OR |
| (ITEM 10) ACTUAL SIZE | (ITEM 9) ACTUAL SIZE |
(ITEM 1 or 3) SIDE TABLE | 1/4” X 1 3/8” BOLT 8pcs | 1/4” x 1” BOLT 8 pcs |
(ITEM 5) FRONT WHEEL LEG - WOOD
OR
(ITEM 7) FRONT WHEEL LEG - METAL TUBING
(ITEM 4) REAR WHEEL LEG - WOOD
(ITEM 6) REAR WHEEL LEG - METAL TUBING
•Note: There are two side table designs used depending on the model: Left and Right Teardrop Side Tables (Item 1 & 2), 
or Deluxe Side Tables (Item 3).
•Lay Left Side Table (depending on your model you have either 2 or 4) upside down on flat surface as shown. Locate the 
two Wheel Legs which are the shorter legs with a large axle hole at one end.
•On models with wooden legs, place Rear Wheel Leg so four large recessed holes face away from Side Table (Fig. A) and two threaded holes in edge of leg point outward. (Fig. B)
• Insert four 1/4” x 1” (1/4” x 1 3/8” for Metal legs) Bolts through the leg into the threaded holes of Side Table. (Fig. A) Do not tighten bolts completely.
•Attach Front Wheel Leg to Left Side Table in the same way. On models with wooden legs make sure the two threaded holes on the edge of each leg face outward. Make
sure the three velcro patches face inside on all models.
FIG. B
| AXLE HOLES |
| (WHEEL LEGS) |
FRONT WHEEL |
|
LEG - THREE |
|
VELCRO |
|
PATCHES FACE |
|
INSIDE |
|
| REAR WHEEL LEG |
SIDE TABLE | BONZA - WOOD |
BONZA DELUXE - METAL | |
(TEARDROP |
|
TABLE |
|
SHOWN) | FIG. A |
THREADED HOLES IN LEGS (Deluxe Models with Metal legs do not have these threaded holes and
can be oriented either way.)
FOUR LARGE RECESSED HOLES (Wooden Legs Only)
1/4” x 1” BOLT (1/4” X 1 3/8” Deluxe Models)
9
