![](/images/new-backgrounds/1229423/22942361x1.webp)
Cleaning instructions for Charcoal and Wood chunk ash(Continued)
6.Close the hood and remove the drip pan and bottom panel to dispose of ashes. The bottom panel can be removed by first removing the screw on each side of the grill. For easier cleaning of charcoal ashes the bot- tom panel can be lined with aluminum foil. Make sure all openings are left unobstructed and cut a hole for the grease to drip into the grease pan.
Your Cart is manufactured using a hardwood ideally suited to outdoor use. To maintain its condition and appearance, annual application of polyurethane is recommended.
·Follow all instructions and warnings listed on the polyurethane container.
·Always use a brush to apply the polyurethane, do not use a spray can.
·Do not apply polyurethane to the metal grill body.
·Using the Grill Storage Cover (50) will help maintain the appearance of your grill and protect the finish.
Bottom Panel
Drip Pan
7.Reinstall drip pan and bottom panel.
8.Reinstall the burners and lower the louvers into position. Make sure the left louver rests on the right louver when rotated into position.
9.Push, then pull the louver adjusting knob to ensure the louvers function correctly.
10. Install cooking grids.
11.Position louvers in either gas or charcoal mode to prepare for next cooking session.
Caring for the Wood Cart
·Always turn off the LP gas cylinder at the LP cylinder valve when not in use. Allow grill to cool before handling parts or cleaning.
·Do not use aerosols or store flammable liquids or materials near this gas grill.
·Never apply polyurethane to the wood cart while grill is in use or hot. Allow polyurethane to
completely dry before further use.
|
| Preventive Maintenance |
In addition to the above Care and Maintenance Instruction, | ||
periodically check and tighten all nuts, bolts, and screws. | ||
|
| Storage |
· Never store an LP gas cylinder indoors (empty or | ||
filled). | If storing the gas grill indoors, | |
disconnect | the LP gas cylinder and store it outdoors | |
out of the | reach of children. | |
· Never leave an LP gas cylinder inside a | ||
vehicle | which may become overheated by the sun. |
·Never store a spare or disconnected LP gas cylinder under or near the LP gas grill.
·Always turn off the gas cylinder when not in use. Allow grill to cool before handling parts or cleaning.
·Even though your LP gas cylinder may appear to
be empty, gas may still be present and the cylinder should be transported and stored accordingly.
·Store your LP gas grill in a cool dry place .
·Disconnect LP gas cylinder from grill and store outside,
in | a dry, |
heat or ignition. | |
Cap. |
·Remove burners and wrap with aluminum foil to prevent insects from entering the burner holes. Store wrapped
burners on top of the cooking grids.
·Before next use, remove aluminum foil and reinstall burners and grids according to Steps 8 and 10 of
Assembly Instructions. · Check your LP gas grill for gas leaks, deterioration, proper assembly, and burner obstructions before using the
31