TROUBLESHOOTING

Error

Cause

Solution

 

 

 

The display shows

1. The pressure in the cuff is

1. Take a new reading and make sure the

“RETEST”

cuff is inflated to 30 mmHg above the

not 30 mmHg higher than the

 

expected blood pressure.

 

expected blood pressure.

 

2. The user must remain completely still and

 

2. The user moved the arm or the

 

not move the arm or the appliance during

 

appliance during measurement.

 

measurement.

 

3. The pressure drops fast due to

 

3. Check for leakage in the circuit.

 

leakage in the circuit.

 

 

 

 

 

The pressure only

The hose is incorrectly fitted.

Fit the hose correctly.

rises slowly during

 

 

 

inflation.

 

 

 

 

 

The display shows

 

 

the battery symbol

The batteries are almost dead.

Replace the batteries.

or the display is

Check that the batteries are fitted the right

 

blank.

 

way round.

Unusual readings

1. The cuff has not been tightened

1. Tighten the cuff and position it as

sufficiently or has been

 

described in the section “Fitting the cuff

 

positioned incorrectly.

 

on the arm”.

 

2. The user moves or speaks

 

2. The user must remain still and avoid

 

during measurement.

 

speaking during measurement.

 

3. The user is too nervous or

 

3. The user must try to relax and take 2-3

 

tense during measurement.

 

deep breaths.

 

4. The user is not in the correct

 

4. The user must lie down or sit as described

 

lying or sitting position.

 

in “Measuring the blood pressure”.

 

5. The user pauses during

 

5. Inflate the cuff as described in “Measuring

 

inflation or uses the appliance

 

the blood pressure”.

 

incorrectly.

 

6. Check result by performing one or more

 

6. The user may have a heart

 

new measurements. Talk to your doctor if

 

problem.

 

you consistently have abnormal readings.

 

 

 

 

 

STORAGE

Store the appliance in the accompanying storage pouch (12) when not in use.

Store in a dry, cool place.

Do not place heavy objects on top of the appliance.

Remove the batteries if the appliance is not to be used for a prolonged period.

Do not stretch, twist or bend the air hoses or the cuff.

CLEANING

When cleaning the appliance, you should pay attention to the following points:

Do not submerge the appliance in water, and do not let water enter the appliance.

Clean the appliance and the cuff by wiping them with a damp cloth. A little detergent can be added to the water if the appliance and the cuff are heavily soiled.

Do not use a scouring pad, steel wool or any form of strong solvents or abrasive cleaning agents to clean the appliance, as they may damage the outside surfaces of the appliance.

27

630015_IM.indd 27

2008-7-2 16:06:31

Page 27
Image 27
Melissa 630-015 manual Troubleshooting, Storage, Cleaning