Memorex DBVT1341 owner manual Muting, Channel UP / Down, Call, Sleep, Quick View, Tv/Caption/Text

SLEEP 120

TV OPERATION

MUTING

Press MUTING button to switch off

the sound. The TV/VCR’s sound willMUTING be silenced and “MUTING” will

briefly appear on the screen. The sound can be switched back on by pressing this button again or one of the VOLUME Up or Down buttons.

CHANNEL UP / DOWN

Press and release the CHANNEL

Up or Down button. The channelCH 012 automatically stops at the next

channel set into memory. For proper operation, before selecting chan- nels, they should be set into the memory.

See pages 15 and 16 “To memorize channels”.

CALL

Press the CALL button. The clock, date, channel number, real time tape counter, tape speed and VCR operation will be indicated.

Press CALL button again to remove the call display.

Current time			VCR operation
				: Play
8:47AM THU	CH 012	Channel No.		: Rewind
		Auto Repeat		: Fast-forward
		Tape In		: Eject
	00:04:38 SP			: Recording

	Tape Speed	: Pause
Real Time Counter		: Stop

NOTE: To listen through the headphone, insert a headphone (not supplied) with a 1/8" mini plug into the PHONES jack on the front. The sound from the TV speaker is muted.

SLEEP

To set the TV/VCR to turn off after a preset amount of time, press the SLEEP button on the remote control. The clock will count down 10 minutes for each press of the SLEEP button (120, 110, ...10, 0). After the sleep time is programmed, the display will appear briefly every ten minutes to remind you that the sleep timer is operating. To confirm the sleep timer setting,

press the SLEEP button and the remaining time will be momentarily displayed. To cancel the sleep timer, press the SLEEP button repeatedly until the display turns to 0.

14

QUICK VIEW

This button allows you to go back

to the last channel selected byCH 012 pressing the QUICK VIEW button.

Press this button again to return to the last channel you were watch- ing.

TV/CAPTION/TEXT

Press TV/CAP/TEXT button to switch between normal TV and the two closed caption modes (captions and full screen text). Closed

captioning will display text on theCAPTION CH 1 screen for hearing impaired viewers.

NOTES: • If using an indoor antenna or if TV reception is very poor, the Closed Caption Decoder text may not appear. In this case, adjust the antenna for better reception or use an outdoor antenna.

•When activating the Closed Captioned Decoder, there will be a short delay before the Closed Captioned text appears on the screen.

•Closed Captioned TV programs can be recorded and played back on a VCR with the Closed Captioned text intact. The Closed Captioning text will disappear during Cue, Rewind and Pause modes or if the VCR tracking is not adjusted properly.

•Closed Captioned text is only displayed in locations where it is available.

•If the Call display is on, the Closed Captioning text will not appear.

WHAT IS CLOSED CAPTIONING?

This television has the capability to decode and display Closed Captioned television programs. Closed Captioning will display text on the screen for hearing impaired viewers or it will translate and display text in another language.

CLOSED CAPTIONING WITH A VCR

Closed Captioned programs can be recorded and played back on a VCR with the Closed Captioned text intact. The Closed Captioned text will disappear during Cue (Fast Forward Search), Review (Rewind Search) and Pause Modes or if the VCR tracking is not adjusted properly.

TO VIEW CLOSED CAPTIONS

Press the TV/CAP/TEXT button on the remote control to switch between normal TV and the two Closed Caption Modes (Captions and Full Screen Text).

5A30301A E P12-19 14 04/10/2001, 18:01