PROGRAMMING TV/VCR COMBO CONTROL
Locate the brand name ofyour TV/VCR Combo in the
Setup Codes For TV/VCR Combos section below,and write
it in the following space.
TV/VCR Combo Brand:________________________
The brands are listed in alphabetical order with popular
codes listed first.You will use one ofthese codes to pro-
gram the Millennium 4 to operate your TV/VCR Combo:
1. Turn on your TV/VCR Combo and insert a
video cassette.
2. On the Millennium 4,press VCR once. Press
and hold SETUP until the LED blinks twice,
then release SETUP.
3. Enter the first four-digit code for your TV/VCR
Combo.If you perform this procedure correct-
ly,the LED will blink twice.
NOTE:If the LED did not blink twice after entering
the code’s last digit,then repeat steps 2 through 3 and
try entering the same code again.
4. Aim the Millennium 4 at your TV/VCR Combo
and press POWER once.The unit should turn
off.If it does not respond,repeat steps 2-3,tr y-
ing each code listed for your brand until you
find one that works.Ifit stil l does not work,try
searching for the code (see Searching For Your
Codeon page 26).
5. Ifyou’ve located a TV/VCR setup code that
works your TV/VCR Combo and a separate TV
code is also listed,you’ll need to program this
code into the Millenium 4 to access volume con-
trol (see Programming TV Control on page 8).
Ifthere is no separate T V code listed,you wil l
need to perfrom the following steps to access
volume control:
a. Press and hold SETUP until the LED blinks
twice,then release SETUP.
b. Enter 9 - 9 - 3.The LED will blink twice.
c. Press VCR once. The LED will blink twice.
16
Millennium 4 Mnl M4094 2/29/00 6:21 PM Page 16