PROGRAMMING CHANNEL CONTROL LOCK
By activating this feature,the Millennium 4 will only
allow access to the channel control capabilities ofyour
cable converter.This will guarantee that you do not inad-
vertently change the channel on your TV or VCR.
To Activate Channel Control Lock:
1. On the Millennium 4,press and hold SETUP
until the LED blinks twice,then release SETUP.
2. Enter 9- 9 - 6.The LED will blink twice.
3. Press CH +once.The LED will blink twice.
4. Now,regardless ofwhat mode you select (i.e.,
TV,VCR,or CBL),only the channel control capa-
bility ofyour cable converter will be accessible.
NOTE:This feature does not affect the Audio mode.
To De-Activate Channel Control Lock:
1. On the Millennium 4,press and hold SETUP
until the LED blinks twice,then release SETUP.
2. Enter 9- 9 - 6.The LED will blink twice.
3. Press CH –once.The LED will blink twice.
4. The Millennium 4 will again provide TV and
VCR channel control capabilities while in the
TV or VCR mode.
21
Millennium 4 Mnl M4094 2/29/00 6:21 PM Page 21