30
CHANGING VOLUME LOCK
The Millennium4 is set to control volume ofa component
through your TV while in the TV,VCR,or Cable mode.
However,in the Audio mode,you have separate control of
ofyour audio component’s volume.
Ifyour TV is not remote controllable,or if you would like
the volume to be controlled by a different component,you
can change the Volume Lock setting to control a volume
through a non-associated mode (e.g.,through the cable in
the TV mode).

To change Volume Lock to the CABLE mode:

1. On the Millennium 4,press and hold SETUP
until the LED blinks twice,then release SETUP.
2. Enter 9- 9 - 3and then press CBL once.The
LED will blink twice.
3. Now,whenever you press Volume +,Volume –,
or MUTE on the Millennium 4,volume will be
controlled by your Ca ble Converter.

To change Volume Lock to the TV mode:

1. On the Millennium 4,press and hold SETUP
until the LED blinks twice,then release SETUP.
2. Enter 9- 9 - 3and then press TV once.The
LED will blink twice.
3. Now,whenever you press Volume +,Volume –,
or MUTE on the Millennium 4,volume will be
controlled by your T V.

To change Volume Lock to the VCR mode:

1. On the Millennium 4,press and hold SETUP
until the LED blinks twice,then release SETUP.
2. Enter 9- 9 - 3and then press VCR once.The
LED will blink twice.
3. Now,whenever you press Volume +,Volume –,
or MUTE on the Millennium 4,volume will be
controlled by your VCR.
Millennium 4 Mnl M4094 2/29/00 6:21 PM Page 30