Memorex MILLENNIUM 4 PROGRAMMING CABLE CONVERTER (OR DBS RECEIVER) CONTROL

PROGRAMMING CABLE CONVERTER
(OR DBS RECEIVER) CONTROL
The Millennium 4 is preprogrammed at the factory to
operate the cable converter given to you by your cable
company.However,if you have another brand or model
ofcable converter or satellite receiver that you would like
to control,then you’ll need to perform the following
instructions to unlock the cable key,enter i n a new code,
and lock the cable key again.
To unlock the Cable key:
1. Turn on the Cable Converter or DBS Receiver.
2. On the Millennium 4,press CBL once. Press
and hold SETUP until the LED blinks twice,
then release SETUP.
3. Enter 9- 9 - 7.The LED will blink twice.
4. Press CH –once.The LED will blink twice.
To program the Cable key:
1. Locate the brand name ofyour Cable Converter
(or Direct Broadcast Satellite Receiver) in the
Setup Codes For Cable Converters(or Setup
Codes For DBS Receivers) section starting on the