SEARCHING FOR YOUR CODE
Ifyour TV,VCR,Cable Converter or Audio Component
does not respond to the Millennium 4 after trying all of
the codes listed for your brand,or ifyour brand is not
listed at all,try searching for your code.
For example,to search for a code for your TV:
1. Turn on your TV.
2. On the Millennium 4,press and hold SETUP
until the LED blinks twice,then release SETUP.
3. Enter 9- 9 - 1.The LED will blink twice.
4. Aim the remote control at the the TV and slow-
ly alternate between pressing POWER and TV.
Stop when the TV turns off.
NOTE:In the search mode,the Millennium 4 will
send IR codes from its library to the selected compo-
nent,starting with the most popular code first.
5. Press SETUP once to lock in the code.
6. To search for the codes ofyour other compo-
nents,repeat steps 1 through 5,but substitute
the appropriate key (i.e.,VCR,CBL,or AUDIO)
for the (VCR,Cable,or Audio) component you
are searching for.