Memorex MVD2113 owner manual Antenna connections

Antenna connections

If you are using an indoor or outdoor antenna, follow the instructions below that correspond to your antenna system. If you are using a cable TV service (CABLE), see page 12 for Cable TV connections.

Combination VHF/UHF antenna (Single 75 ohm cable or 300 ohm twin-lead wire)

Connect the 75 ohm cable from the combination

VHF/UHF antenna to the antenna jack.

If your combination VHF/UHF antenna has a 300 ohm twin-lead wire, the use of the 300-75 ohm matching transformer may be necessary.

Antenna	Antenna
jack	jack

75 ohm

coaxial300-75 ohm

cablematching transformer

ENGLISH

Combination VHF/UHF antenna (Separate VHF and UHF 300 ohm twin-lead wires)

300-75 ohm matching transformer

Antenna

jack

Combiner

UHF 300 ohm

Connect the UHF 300 ohm twin-lead wire to the combiner (not supplied). Connect the VHF 300 ohm twin-lead wire to the 300-75 ohm matching trans- former. Attach the transformer to the combiner, then attach the combiner to the antenna jack.

VHF 300 ohm

Separate VHF/UHF antennas (75 ohm VHF cable and 300 ohm UHF twin-lead wires)

Connect the VHF 75 ohm cable and UHF 300 ohm twin-lead wire to the combiner (not supplied). Attach the combiner to the antenna jack.

Antenna

jack

Combiner

VHF 75 ohm

UHF 300 ohm

11

5P20521A [E] P06-11 11

5/12/04, 2:41 PM