Memorex MVD2113 Playback procedure, Some discs may take a minute or so to start playback, Close

Models: MVD2113

1 104
Download 104 pages 4.53 Kb
Page 28
Image 28

Playback procedure

NOTES:

If a non-compatible disc is loaded, “Incorrect Disc”, “Region Code Error” or “Parental Error” will appear on the TV screen according to the type of loaded disc. If these appear, check your disc again (see pages 25 and 38).

Some discs may take a minute or so to start playback.

A “Prohibition” symbol may appear at the upper left of the screen.

This symbol means either the feature you tried is not available on the disc, or the unit can not access the feature at this time. This does not indicate a problem with the unit.

When you set a single-faced disc label downwards (ie. the wrong way up) and press PLAY or OPEN/CLOSE on the unit, “Reading” will appear on the display and then “Incorrect Disc” will be dis played.

Some playback operations of DVDs may be intentionally fixed by software producers. Since this unit plays DVDs according to the disc contents the software producers designed, some playback features may not be available. Also refer to the instructions supplied with the DVDs.

28

1 Press TV/DVD to select the DVD mode.

Press OPEN/CLOSE on the unit or the remote control.

The disc tray will open.

2 Place a disc onto the tray. Position it with the printed label side up, align it with the guides, and place it in its proper position.

3 Press PLAY or OPEN/

CLOSE.

The disc tray closes automatically.

On the screen, changes to “Reading” and then playback will commence.

• A menu screen may appear on the TV screen, if the disc has a menu

Reading

feature. In this case, press , , , or ENTER to operate a menu feature.

4 Press STOP to end playback.

The unit memorizes the stopped point, depending on the disc. “” appears on the screen for approx. 4 seconds. Press PLAY to resume playback (from the scene point).

If you press STOP again (“ ” appears on the screen) or unload the disc, the unit will clear the stopped point.

5 Then press OPEN/CLOSE. The disc tray opens.

Remove the disc and press POWER.

The disc tray closes automatically and unit turns off.

5P20521A [E] P27-32

28

5/12/04, 2:42 PM

Page 28
Image 28
Memorex MVD2113 Playback procedure, Some discs may take a minute or so to start playback, Press Play or Open, Close