Setting up the VCR section
Setting the video channel
To view playback of a recorded tape or DVD disc, or to watch a program selected by the VCR's channel selector, the TV must be set to channel 3 or 4 (video channel).
When a TV is connected with the 75 ohm coaxial cable only.
1 Press and hold 3 or 4 on the remote control for 3 seconds in the standby mode to select CH 3 or 4. The selected chan-
nel number will flash on the display for about 4 seconds.
2Turn ON the TV and set to CH 3 or 4 to correspond with the channel selected in step 1.
3Press POWER to turn on the DVD/VCR.
4Press VCR/DVD to select the VCR mode. The VCR indicator on the front panel will light.
5Press TV/VCR to select the VCR position. The VCR indicator will appear in the display.
6Select any channel to receive a TV station in your area. The channel number will appear on the screen for about 4 seconds.
For a
If CH 3 or 4 corresponding to the video channel cannot be tuned on your TV, proceed as follows: set the VCR 3/4 channel selector and the TV to CH 3 or 4, play back a prerecorded tape and tune the TV to receive a sharp color picture from the video cassette recorder. Refer to your TV owner's manual for details.
NOTES:
•When shipped from factory, the video channel is set to CH 3.
•If the unit does not operate properly, or No key opera- tion (by the unit and/or the remote control): Static elec- tricity, etc., may affect the player's operation. Disconnect the AC power cord once, then connect it again.
Setting the language
You can choose from three different languages
(English, French and Spanish) for the
1 Press VCR MENU. |
| MENU |
|
| |
The VCR menu screen |
|
|
| ||
| TIMER REC SET | ON | OFF | ||
| |||||
will appear. Press SET + |
| AUTO REPEAT | |||
| |||||
| SAP | ON | OFF | ||
| |||||
or – to select the “SYS- |
|
| CH SETUP |
|
|
|
|
|
| ||
TEM SETUP” menu, then |
|
| SYSTEM SETUP |
|
|
|
|
|
|
| |
press ENTER. |
|
| |||
If you use the unit for the |
|
| |||
first time and press VCR
MENU, instead of the main menu screen on the right the “SYSTEM SETUP” menu screen in step 2 may appear.
2Press SET + or – to select
the “LANGUAGE” option, | SYSTEM SETUP |
| |
then press ENTER. |
| CLOCK SET |
|
|
| ||
| LANGUAGE/IDIOMA/LANGUE | ||
| |||
|
| NO NOISE BACKGROUND | |
|
| ON | OFF |
|
| AUTO CLOCK ON | OFF |
|
| ||
|
| STANDARD TIME |
|
|
|
| |
|
| DAYLIGHT SAVING TIME | |
|
| ||
3Press SET + or – to select
the desired language: En- glish (ENGLISH), Spanish (ESPAÑOL) or French (FRANCAIS), then press
ENTER.
4Press VCR MENU until the MENU screen is cleared.
NOTES:
•Both the VCR and the DVD have their own menu option (See page 23).
•If no buttons are pressed for more than 60 seconds, the MENU screen will return to normal
14
2D81121A[E] | 14 | 6/4/04, 18:19 |
