Manual clock setting
You must set the date and time manually for Timer Recordings, ON/OFF Timer and Daylight Saving Time if the Auto Clock process did not set them correctly.
Example: Setting the clock to “8:30 AM”, 30th (SAT) October, 2004.
Automatic memory tuning
The VCR can receive a maximum of 181 channelsCHTVSETUPCABLEby presetting the channels into memory.
1 In the “CH SETUP” menu, press | UTOCHMEMORY |
SET + or – to select “AUTO CH | |
MEMORY”, then press ENTER. |
|
1Press VCR MENU.
Press SET + or – to select the “SYSTEM SETUP” option, then press ENTER.
2Press SET + or – to select the
“CLOCK SET” option, then press
ENTER.
3Press SET + or – to set the month, then press ENTER.
4Set the day, year and time as in step 3.
After setting the clock, date and time starts functioning automatically.
| MENU |
|
|
| TIMER REC SET | ON | OFF |
| AUTO REPEAT | ||
| SAP | ON | OFF |
| |||
| |||
| CH SETUP |
|
|
| SYSTEM SETUP |
|
|
|
|
| |
|
| ||
SYSTEM SETUP
CLOCK SET
LANGUAGE/IDIOMA/LANGUE
NO NOISE BACKGROUND
ON OFF
AUTO CLOCK 
ON OFF 
STANDARD TIME
DAYLIGHTMONTHSAVING10TIME
·+/-/ENTER/CANCYEARTIME 204EL/MEN8:30AMUÒ
2 The DVD/VCR will begin memoriz- |
ing all the channels available in your area.
To add/delete channels
You can add the channels you want or delete the chan- nels you do not want manually.
1 | Press VCR MENU. | ACHTVDD/DELETEUTOSETUPCABLECHMEMORY |
|
|
| ||
| Press SET + or – to select the |
| |
| “CH SETUP” mode, then press |
| |
| ENTER. |
| |
2 | Press SET + or – to select the |
| |
| “ADD/DELETE” mode, then press | ADD | CH003 |
| ENTER. | ||
3 | Select the desired channel to be |
|
|
NOTES:
•After a power failure or disconnection of the power plug, the time display will be lost. In this case, set the present
time again if the Auto Clock did not set correctly.
• To move cursor backward, press CANCEL.
Tuner setting
This DVD/VCR is equipped with a channel memory feature which allows channels to skip up or down to the next channel set into memory, skipping over unwanted channels. Before selecting channels, they must be programmed into the DVD/VCR’s memory. In addition to normal VHF and UHF channels, this DVD/VCR can receive up to 113 Cable TV channels. To use this DVD/ VCR with an antenna, set the TV/CABLE menu option to the TV mode. When shipped from the factory, this menu option is in the CABLE mode.
1 | Press VCR MENU. | TIMERMENURECSET | |
| SETUP” mode, then press ENTER. | CHSETUP | |
| |||
TV/CABLE selection | AUTOAPREEATONOFF | ||
| Press SET + or – to select the “CH | ||
2 | TV/CABLE mode. | CHTVUTOSETUPCABLECHMEMORY | |
Press SET + or – to select the | ADD/DELETE | ||
3 | Press ENTER to select the TV or | ||
| CABLE mode. |
| |
| The arrow indicates the selected | ||
| mode. |
|
|
| TV | - VHF/UHF channels |
|
| CABLE - CABLE TV channels |
| |
4Press VCR MENU until the MENU screen is cleared.
16
memorized or deleted using SET | |
+ or – button, or using Number | |
keys. |
|
4Press ENTER to select the “ADD” or “DELETE”.
5Press VCR MENU until the MENU screen is cleared.
Noise elimination
When you don't want to receive a weak signal broad- cast, the Blue back screen can be obtained by selecting the NO NOISE BACKGROUND “ON”. When the unit is shipped from the factory, the NO NOISE BACKGROUND is set to the “ON”.
1 In the “SYSTEM SETUP” menu, | SYSTEM SETUP |
|
press SET + or – to select “ NO | CLOCK SET |
|
LANGUAGE/IDIOMA/LANGUE | ||
NOISE BACKGROUND”. | NO NOISE BACKGROUND | |
ON | OFF | |
| AUTO CLOCK ON | OFF |
| STANDARD TIME |
|
2 | Press ENTER to select the “ON” | DAYLIGHT SAVING TIME |
|
position. | |
|
3Press VCR MENU until the MENU screen is cleared.
2D81121A[E] | 16 | 6/4/04, 18:19 |
