PROGRAMMING DVD PLAYER CONTROL (Continued)
Setup Codes for DVD Players:
Denon | 0490, 0634 |
GE | 0522 |
Harman/Kardon | 0582 |
JVC | 0558, 0623 |
Kenwood | 0534 |
Magnavox | 0503 |
Marantz | 0539 |
Mitsubishi | 0521 |
Onkyo | 0503, 0627 |
Optimus | 0571 |
Panasonic | 0490, 0632 |
Philips | 0503, 0539 |
Pioneer | 0525, 0571, 0632 |
Proscan | 0522 |
RCA | 0522 |
Samsung | 0573 |
Sharp | 0630 |
Sherwood | 0633 |
Sony | 0533 |
Technics | 0490 |
Theta Digital | 0571 |
Toshiba | 0503 |
Yamaha | 0490, 0545 |
Zenith | 0503, 0591 |
Setup Codes for LD Players:
Aiwa | 0203 |
Denon | 0059, 0172 |
Funai | 0203 |
Mitsubishi | 0059 |
NAD | 0059 |
Optimus | 0059 |
Panasonic | 0204 |
Pioneer | 0059 |
Quasar | 0204 |
Realistic | 0203 |
Sony | 0193, 0201 |
Technics | 0204 |
SEARCHING FOR YOUR CODE
If your video component does not respond to the One For All
For example, to search for a code for your TV:
1.Turn on your TV. Set it to the TV mode.
2. 
On the remote control, press and hold SET until the LED blinks twice, then release SET.
3. 
Enter 9 - 9 - 1. The LED will blink twice.
4. 
Aim the remote control at the the TV and slow- ly alternate between pressing POWER and TV. Stop when the TV turns off.
NOTE: In the search mode, the One For All
5. 
Press SET once to lock in the code.
6.To search for the codes of your other compo- nents, repeat steps 1 through 5, but substitute the appropriate key (i.e., DVD, VCR, or CBL/SAT) for the (DVD/LD,VCR, or Cable/Satellite) com- ponent you are searching for.
22 | 23 |
