CHANGING VOLUME LOCK (Continued)
To change Volume Lock back to the TV mode:
1. 
On the remote control, press and hold SET until the LED blinks twice, then release SET.
2. 
Enter 9 - 9 - 3 and then press TV once. The LED will blink twice.
3.Now, whenever you press VOL +, VOL
USING THE MENU KEY
On your One For All
When you press MENU, the VOL+,
To exit out of the Menu mode, press or EXIT to return to normal operation.
USING KEYMOVER
The One For All
NOTE: The following keys cannot be mapped: TV, DVD, VCR, CBL/SAT, SET, M.POWER, V.CONFIG, and learning keys L1~ L4.
For example, if your VCR does not have volume control, you can map the volume and mute keys from the TV mode to the VCR mode as follows:
1. 
On the remote control, press and hold SET until the LED blinks twice, then release SET.
2. 
Enter 9 - 9 - 4.
3. 
For the source mode, press TV once.
4. For the source key, press VOL + once.
5. For the destination mode, press VCR once.
6. For the destination key, press VOL + once.
7. The LED will blink twice indicating the key- moved sequence is correct.
8. 
Repeat steps 1 through 7 twice more, substitut- ing VOL – and MUTE as source and destination 
keys in steps 4 and 6.
Upon completion of the above procedure, you can now use your One For All
28 | 29 |
