Manuals / Meridian America / Home Audio / CD Player

Meridian America 506 manual Connecting the CD player, Back panel, Setting up the CD player

Models: 506

1 31

Download 31 pages 32.43 Kb

Page 22

Connecting the CD player

Connecting the CD player

Back panel		Use this output	To connect to this
The CD player provides three alternative signal outputs to allow		Digital Output	DSP6000 or DSP5000 Digital
			Loudspeakers, a D/A converter, digital
you to choose the highest-quality method of connection			Loudspeakers, a D/A converter, digital
you to choose the highest-quality method of connection			preamplifier, or digital recorder, using
available on the system to which you are connecting.			preamplifier, or digital recorder, using
available on the system to which you are connecting.			digital cable.
			digital cable.
The 506 24-Bit CD Player produces an extremely low-noise low-		Optical EIAJ	A D/A converter, digital preamplifier, or
jitter electrical digital output, and this is the recommended			digital recorder, using optical fibre.
method of connection to digital equipment.		Phono outputs	A 502 Analogue Controller, or other
		Phono outputs	A 502 Analogue Controller, or other
The following table lists the equipment which uses each of the			audio equipment, using conventional
			analogue audio leads.
three output types:			analogue audio leads.
three output types:

OFF

ON

L

R

OUTPUT	DIGITAL	OPTICAL		COMM

	OUTPUT	EIAJ	(Meridian Comms Only)

Phono	Digital		Optical			Comms
outputs	output		EIAJ output			connections

Setting up the CD player

17

Image 22

Meridian America 506 manual Connecting the CD player, Back panel, Setting up the CD player

FAQ

What are the alternative signal outputs provided by the CD player?

The CD player provides three alternative signal outputs - Digital Output, Optical EIAJ, and Phono outputs.

What is the recommended method of connection to digital equipment?

The recommended method of connection to digital equipment is the Optical EIAJ output.

Which equipment uses each of the three output types?

The official manual lists the equipment which uses each of the three output types - Digital, Optical, and Phono outputs.

Contents

Meridian 506 24-BitCD Player Meridian 506 24-BitCD Player User Guide PrefacePreface Sales and service in the UKSales and service in the USA Designed and manufactured in the UK bySetting up the ContentsUsing the CD player IntroductionPreface Introduction Introduction500 Series communications The Meridian 500 SeriesIntroduction Available accessories Specification and accessoriesSpecification DimensionsIntroduction Using the CD player Using the CD playerUsing the CD player Front panelPlay To switch to standby Switching on and offTo switch on from standby UsingTo play starting from a particular track Playing a discTo move to the next track To play the discTo cancel the repeat function Stopping, pausing, and repeating playTo continue after pausing To continuously repeat a discTo choose a track to programme Programming a selectionUsing the CD player To clear a programme To add a track to a selectionTo remove a track from a selection Using the CD playerScanning a disc Disc information and scanningTo change the display To scan through a discTo display the index number Using index pointsTo move to an index point 14.7Using the CD player Setting up the CD player Setting up the CD playerRadio interference UnpackingTo position the CD player Setting up the CD playerSetting up the CD player Connecting the CD playerBack panel Series equipment Setting upTo connect to other Meridian N.ConSetting up the CD player To connect to a 501 Control UnitTo connect to a conventional preamplifier 501 Control UnitSetting up Type Typethe CD player There is no sound when playing a disc TroubleshootingNo lights are displayed when switching on The drawer will not openThere is interference on the radio and/ or television when the CD player is switched on To clean the case, display panel, and keypad MaintenanceCleaning To clean the audio connectionsGuarantee Service and guaranteeService Setting up the CD playerIndex IndexProgramming a selection Indexcontinued