Switching on and off
During normal use the CD player should be left in the standby state. This uses a negligible amount of electricity, but ensures that the components of the CD player operate at maximum efficiency from the moment you start playing a disc.
If you are not going to use the CD player for a period of several days you should switch the unit completely off, at the back panel, and disconnect it from the AC power supply.
To switch on from standby
● Press Open (front panel only), >(Play), * (Stop), or = |
(Pause). |
● Switch on any other equipment connected to the CD player |
To switch to standby
which is not part of the Meridian 500 Series. |
To insert a disc
●Press Off.
The display will show:
.
Using
●Press Open (front panel only) to open the drawer.
●Place your disc, label side up, over the metal hub, as shown opposite.
●Press Open again to close the drawer.
If you have other Meridian 500 Series equipment connected to the CD player, these units will also switch to standby.
If a disc is currently playing, switching to standby will stop the disc, and the disc can safely be left in the unit.
the CD player
7