Electronic shutter settings
Shutter modes
Shutter modes and shutter speeds that can be set
Mode | Shutter speed | Applications |
|
|
|
Standard | 1/60, 1/120, 1/250, | For shooting |
| 1/500, 1/1000 and | clearly |
| 1/2000 (sec.) |
|
|
|
|
SYNCHRO | Within the 50.2 Hz to | For shooting monitor screens with |
SCAN | 248.0 Hz range | minimal striping in the horizontal |
|
| direction |
SUPER V |
| For improving the vertical resolution |
|
|
|
<Notes>
≥Whatever mode is set for the electronic shutter, the faster the shutter speed, the lower the camera’s sensitivity.
≥In the automatic iris mode, the faster the shutter speed, the more the iris opens and the shallower the depth of focus.
≥When SUPER V has been selected, the camera’s sensitivity will be halved.
2 Press the SHUTTER switch to SEL again, and repeat until the desired mode or speed is displayed.
When all the modes and speeds are displayed, the display changes in the following sequence.
Standard mode
|
| 1/60 |
|
| 1/120 |
| 1/250 |
| 1/500 |
| 1/1000 |
|
| 1/2000 |
| |||
|
|
|
|
|
|
|
|
|
| |||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
| SUPER V |
|
|
|
| SYNCHRO SCAN |
|
|
| |||||
|
|
|
|
| mode |
|
|
|
|
|
| mode |
|
|
| |||
<Note>
The SUPER V mode is not selected as the factory setting. For this reason, it is not displayed at the factory setting.
To select SUPER V mode, set the “SUPER V” of the
Setting the shutter mode and speed
≥In the shutter speed and standard mode, the shutter speed is set by selecting the SHUTTER switch position.
≥In the SYNCHRO SCAN mode, the shutter speed can be easily changed by operating the JOG dial button.
1 PushSEL. the SHUTTER switch from ON to
The current shutter setting appears in the area of the viewfinder screen where messages notifying the user of changes made to settings appear.
SHUTTER switch | JOG dial button |
Setting the synchro scanning mode
1 Push the SHUTTER switch from ON to SEL and set to SYNCHRO SCAN.
The setting can be continuously selected within the 50.2 Hz to 248.0 Hz range by rotating the JOG dial button up or down.
<Note>
After the JOG dial button is rotated up or down while being pressed, the setting will continue to change as long as the button is pressed (even without the button being rotated).
21 (E)
