Panasonic AG-DVC 200E manual Using a battery pack made by Anton Bauer, Release lever

Preparation

Using a battery pack made by Anton Bauer

Before use, charge the battery pack using the exclusive battery charger made by Anton Bauer.

For the charging time and other details, refer to the operating instructions of the battery charger used.

1 AttachBauer. the battery pack made by Anton

Power output connector for lighting

Battery pack made by Anton Bauer

Lighting control switch

<Reference>

A battery holder made by Anton Bauer is equipped with a power output connector for the lighting and a lighting control switch to enable a light to be easily attached. For details on the lighting systems available, contact Anton Bauer.

2 Insert the battery pack and slide it in the direction of the arrow.

2

Release lever

<Reference>

To remove the battery pack, slide it in the opposite direction to the one in which it was attached while keeping the release lever on the battery holder pulled down all the way.

3 Set the battery type.

Select the battery type using <BATTERY> on the sub-menu screen.

Example: Select “NiCd13” if the TRIMPAC13 is to be used; select “NiCd14” if the TRIMPAC14 is to be used. (See page 34)

Using the NP-1B battery pack made by Sony

Before use, charge the battery pack using the exclusive battery charger made by Sony.

For the charging time and other details, refer to the operating instructions of the battery charger used.

1 Remove the battery holder.

Refer to step 1 on page 10.

2 Attachunit. the battery made by Sony to the

Battery case

2

4

Cover

3

15

	Screw provided
Mounting
	with mounting
connector for
	connector for	Hole
NP-1B
	NP-1B

First, remove the battery holder cover.

1Attach the mounting connector for the NP-1B.

2Use the mounting screws to mount the battery case.

3 Tighten the screw for the power supply contact.

4 Insert the top of the cover in the direction of the arrow.

5 Align the hole in the bottom of the cover (metal part) with the hole in the bottom of the battery case, and attach using the screw provided with mounting connector for NP-1B.

3 Set the battery type.

Select the battery type using <BATTERY> on the sub-menu screen.

Select “NiCd12” if the NP-1B is to be used. (See page 34)

11 (E)