Panasonic AG-DVC 200E manual Main menu 1 of 2 main menu, Additional Process, Data READ/WRITE

Menu contents

SCENE MENU (main menu)

PROCESS

Item	Setting		Remarks
	options
H DETAIL	–10	For setting the amount of detail in the
	:	horizontal direction.
	+00
	:
	+10
V DETAIL	–06	For setting the amount of detail in the
	:	vertical direction.
	+00
	:
	+10
DTL CORING	–2	For setting the amount of detail coring.
	:
	+0
	:
	+8
H.DTL FREQ.	2MHz	For setting the detail boost frequency in the
	3MHz	horizontal direction.
	4MHz
MATRIX	A	For selecting the colour compensation
	B	matrix table.
	ADJ	A:	Standard setting
		B:	For shooting under fluorescent lighting.
		ADJ:Changes to the MATRIX value set for
			<ADDITIONAL PROCESS>.
CHROMA LEVEL	–2	For setting the chroma level.
	:
	+0
	:
	+2
CHROMA PHASE	–31	For setting the chroma phase.
	:	The skin tone takes on a reddish tinge in
	+00	the “+” direction.
	:
	+31
MASTER PED	–26	For setting the master pedestal level.
	:
	+00
	:
	+26
KNEE POINT	90%	For setting the knee point position.
	:
	100%
WRITE		For saving the data.

ADDITIONAL PROCESS

Item	Setting	Remarks
	options
MATRIX ADJ.R-G	+00	This is effective when ADJ has been
R-B	+00	selected for the “MATRIX” item of
G-R	+12	<PROCESS>. The MATRIX table can be
G-B	+00	adjusted/set as desired.
B-R	+00
B-G	+00
WRITE		For saving the data.

MAIN menu 1 of 2 (main menu)

#NEXT¢¢¢¢ MAIN 1/2 ¢¢¢¢

DATA READ/WRITE..

SW MODE..

VIDEO OUT..

VTR FUNCTION..

VTR OPTION..

BATTERY..

MIC/AUDIO..

LENS SHADING..

DATA READ/WRITE

Item	Setting	Remarks
	options
FILE SELECT	1/2/3/4	For storing the menu setting parameters in
		the memory. For further details, refer to
		“How to use file select.” (page 24)

SW MODE

Item	Setting		Remarks
	options
LOW GAIN	0dB	For setting the gain allocated to the LOW
	:	GAIN switch.
	36dB	A setting from 0 to 36 dB can be selected.
MID GAIN	0dB	For setting the gain allocated to the MID
	:	GAIN switch.
	9dB	A setting from 0 to 36 dB can be selected.
	:
	36dB
HIGH GAIN	0dB	For setting the gain allocated to the HIGH
	:	GAIN switch.
	18dB	A setting from 0 to 36 dB can be selected.
	:
	36dB
ATW	PRE	For setting at which WHITE BAL switch
	Ach	position the full time auto white balance
	Bch	mode is to be enabled.
	OFF	PRE:ATW is enabled at the PRE position.
		Ach: ATW is enabled at the Ach position.
		Bch: ATW is enabled at the Bch position.
		OFF:Full time auto balance is not
		performed.
SUPER V	ON	For selecting the vertical high resolution
	OFF	mode.
QUICK FOCUS	ENABLE	For enabling or disabling the quick focus
	DISABLE	function.
FULL AUTO	ENABLE	For enabling or disabling the full auto
	DISABLE	function.
SCENE FILE	ENABLE	For enabling or disabling the scene file
	DISABLE	function.
		ENABLE: The	scene	file	function	is
		enabled.
		DISABLE: The	scene	file	function	is
		restricted to the user files.

“” indicates the factory setting.

33 (E)