End-of-Call Options

To display the following options, press within 10 seconds after disconnecting a call.

To select an option, highlight it and press .

Call Again to dial the phone number.

Call:Speaker On to dial the phone number in speakerphone mode.

Save Phone# to save the phone number in your Contacts list. Go to Phone Book appears when the number is already in your Contacts list. (See “Saving a Phone Number” on this page.)

Note: The End-of-Call options are not displayed for calls identified as No ID or Restricted.

Saving a Phone Number

Your PCS Vision Phone can store up to seven phone numbers in each of 300 Contacts entries. Each entry’s name can contain 16 characters. Your phone automatically sorts the Contacts entries alphabetically.

(For more information, see Section 2G: Using the Contacts Directory on page 84.)

To save a number from standby mode:

1.Enter a phone number.

2.Press .

3.Highlight Save Phone# and press .

4.Select a label by highlighting Home, Work, Mobile, Pager, Data, Fax, or No Label and press .

5.Enter a name and press .

If you have already stored entries in the Contacts list, you are prompted to select the following entry modes:

New Name to enter a new name.

From Ph. Book to select a name from the Contacts entry list.

6.Press Save (left softkey).

After you have saved the number, the new Contacts entry is displayed. (See “Contacts List Entry Options” on page 88.)

Section 2A: Your PCS Vision Phone – The Basics

26

Page 37
Image 37
Sanyo RL7300 manual End-of-Call Options, Saving a Phone Number, To save a number from standby mode