Sanyo RL7300 manual DisplayingYour Phone Number, Making and Answering Calls, Making Calls

DisplayingYour Phone Number

Just in case you forget your phone number, your PCS Vision Phone can remind you.

To display your phone number:

1.Press to access the main menu.

2.Select Contacts and press .

3.Select My Phone# and press .

Note: To access the phone’s main menu, press from standby mode. Menu items may be selected by highlighting them with the navigation key and pressing , or you can press the number corresponding to the menu item on your keypad.

Making and Answering Calls

Making Calls

Placing a call from your PCS Phone is as easy as making a call from any

land line phone. Just enter the number and press and you’re on your way to clear calls.

To place a call using your keypad:

1.Make sure your phone is on.

2.Enter a phone number. (If you make a mistake while dialing, press to erase one digit at a time. Press and hold to erase the entire number.)

3.Press or . (To place a call when you are roaming and Call Guard is enabled, see “Controlling Roaming Charges Using Call Guard” on page 73.)

4.When you’re finished, press to end the call.

Tip: To redial your last outgoing call, press or twice.

Tip: When making calls off the Sprint Nationwide PCS Network, always dial using 11 digits (1 + area code + phone number).

You can also place calls from your PCS Phone by using PCS Voice CommandSM (page 194), Speed Dialing (page 29), and using your Call History listings (page 79).

Section 2A: Your PCS Vision Phone – The Basics 17