Using Speed Dialing

With this feature, you can dial your favorite entries using one key press for locations 2-9. (See “Assigning Speed Dial Numbers” on page 90.)

To use speed dial for voice calls:

From standby mode, press and hold the appropriate key for approximately two seconds.

– or –

From standby mode, press the appropriate key and

press or .

The display confirms that the number has been dialed when it shows “Connecting...”.

To use speed dial for PCS Ready Link calls:

From standby mode, press the appropriate key then press and

hold . (See “Setting Speed Dialing for PCS Ready Link Entries” on page 143.)

The display confirms that the number has been dialed when it shows “R-Link calling...”.

Note: Speed dialing is not available when you are roaming; when you are roaming off the Sprint Nationwide PCS Network, you must always dial using eleven digits (1 + area code + number).

Using Abbreviated Dialing

Abbreviated Dialing is another form of speed dialing. It allows you to dial a number by entering just the last four digits of any number in your Contacts directory. The Abbreviated Dialing option becomes available when you enter the last four digits of a phone number and press .

To place a call using Abbreviated Dialing:

1.Dial the last four digits of a contact’s phone number.

2.Press to display the dialing options.

3.Highlight Abbrev. Dial and press , , or .

Note: If there are more than two matched numbers in your Contacts list, the number that comes first alphabetically will be dialed. If there is no matched number, your phone dials the number you set for abbreviated dial with the last 4-digits you entered. See “Setting Abbreviated Dialing” on page 56.

Section 2A: Your PCS Vision Phone – The Basics

29

Page 40
Image 40
Sanyo RL7300 manual Using Speed Dialing, Using Abbreviated Dialing, To use speed dial for voice calls